EXZES ZZ Radio System Manual

33
TR
EXZES ZZ
2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE
Telemetry System with Sanwa Synchronized Link Support
ASSIGN MENU
{
SWITCH, DIAL, LEVER AND TELEMETRY FUNCTION ASSIGNMENTS
}
SYSTEM
1) Fromwithin the SWITCHmenu,scroll UPorDOWN tohighlightthe Switch
Number [MODE] you would like to change. Choose from SW1 [MODE], SW2
[MODE] or SW3 [MODE].
Trim Switch Function Assignments
The Trim Assign function allows you to Assign a multitude of different functions to the five Trim Switches Trm1, Trm2, Trm3, Trm4
and Trm5. This allows you to use the Trim Switches to control those functions while you're driving. In addition, the Trim Resolution
(Step value) and the Direction of Travel (REV) of each Trim Switch can be changed to suit the programmed function and your
specific requirements.
2) PresstheENTERkey,thenscrollUPorDOWNtochangethedesiredSwitch
Modevalue.ChoosefromeitherTOGGLEorPUSH.
MODEsettingrangeisPUSHandTOGGLE.ThedefaultsettingforSW1is
TOGGLEandforSW2andSW3isPUSH.
3) Repeat step 2 to change any other desired Switch Mode values.
Changing the Switch Mode:
The ON and OFF behavior of each Push-Button Switch can be changed to suit the programmed function and your specific
requirements.
The following Switch Modes are available:
TOGGLE - Press the Push-Button Switch to turn the function ON and press the Push-Button Switch a second time to turn the
function OFF.
PUSH - Press and HOLD the Push-Button Switch to turn the function ON and Release the Push-Button Switch to turn the
function OFF.
Changing the Trim Switch Function Assignments:
1) From withintheSYSTEMmenu,scrollUPorDOWNtohighlighttheASSIGN
menu.
2) PresstheENTERkeytoopentheASSIGNmenu,thenscrollUPorDOWNto
highlight the TRIM menu.
3) PresstheENTERkeytoopentheTRIMmenu.TRM1[FUNCTION]>TRIMST will
be highlighted.
SYSTEM