EXZES ZZ Radio System Manual

35
TR
EXZES ZZ
2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE
Telemetry System with Sanwa Synchronized Link Support
ASSIGN MENU
{
SWITCH, DIAL, LEVER AND TELEMETRY FUNCTION ASSIGNMENTS
}
SYSTEM
Auxiliary Dial Function Assignments
The Dial Assign function allows you to Assign a multitude of different functions to the Auxiliary Dial. This allows you to use the
Auxiliary Dial to control those functions while you're driving. The Auxiliary Dial can control either of the two Auxiliary channels or it
can control a function, such as Steering Dual Rate or Steering Exponential. In addition, the Trim Resolution (Step value) and the
Direction of Travel (REV) of the Auxiliary Dial can be changed.
Changing the Auxiliary Dial Function Assignment:
1) FromwithintheSYSTEMmenu,scrollUPorDOWNtohighlighttheASSIGN
menu.
2) PresstheENTERkeytoopentheASSIGNmenu,thenscrollUPorDOWNto
highlight the DIAL menu.
3) PresstheENTERkeytoopentheDIALmenu.DIAL[FUNCTION]>AUX1(orother
value depending on the selected Car Type) will be highlighted.
4) PresstheENTERkey,thenscrollUPorDOWNtochoosethedesiredfunction
you want to Assign to the Auxiliary Dial.
Changing the Auxiliary Dial Step Value:
TheStepfunctionallowsyoutoadjusthowfaraservotravelsorafunctionmoveswhentheAuxiliaryDialisturned.Youcan
Increase the Trim Resolution by Decreasing the Step value, so that the amount of travel is less when you turn the Auxiliary Dial.
This makes it possible to fine-tune servo travel or function movement extremely accurately. Alternately, you could Decrease the
Trim Resolution by Increasing the Step value, so that the amount of travel is more when you turn the Auxiliary Dial. This may not
be as accurate, but it allows you to command large amounts of servo travel or function movement at a time.
Changing the Trim Switch Direction of Travel, Continued:
2) Press the ENTER key, then scroll UP or DOWN to change the desired Trim
Switch Reverse value.
REV setting range is NOR and REV. The default setting is NOR.
3) Repeat step 2 to change any other desired Trim Switch Reverse values.
1) FromwithintheDIALmenu,scrollUPorDOWNtohighlightDIAL[STEP]>5.
2) PresstheENTERkey,thenscrollUPorDOWNtochoosethedesiredAuxiliary
Dial Step value.
STEP setting range is 1 to 100. The default setting is 5. The Step value is a
percentage of travel.
TYP I
TYP II TYP III TYP IV TYP V TYP VI TYP VII TYP VIII TYP IX TYP X
Model Type
AUX1 AUX AUX --- AUX --- --- AUX AUX ---
The table below shows the default Auxiliary Dial functions based on the selected Car Type.
A complete list of functions that can be Assigned to the Auxiliary Dial are shown in the Trim
Switch, Auxiliary Dial and Auxiliary Lever Functions tables on pages 112 and 109.
Function
SYSTEM