EXZES ZZ Radio System Manual

36
EXZES ZZ
TR
2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE
Telemetry System with Sanwa Synchronized Link Support
ASSIGN MENU
{
SWITCH, DIAL, LEVER AND TELEMETRY FUNCTION ASSIGNMENTS
}
SYSTEM
Changing the Auxiliary Dial Direction of Travel:
The direction that the Auxiliary Dial moves the servo or function value can be changed from Normal to Reverse. In Normal mode, the
Auxiliary Dial will move the servo toward the High Side or Increase a function value when the Auxiliary Dial is turned clockwise. In
Reverse mode, the Auxiliary Dial will move the servo toward the Low Side or Decrease a function value when the Auxiliary Dial is
turned counter-clockwise.
1) FromwithintheDIALmenu,scrollUPorDOWNtohighlightDIAL[REV]>NOR.
2) PresstheENTERkey,thenscrollUPorDOWNtochoosethedesiredAuxiliary
Dial Reverse value.
REV setting range is NOR and REV. The default setting is NOR.
Auxiliary Lever Function Assignments
The Lever Assign function allows you to Assign various functions to the Auxiliary Lever. This allows you to use the Auxiliary Lever
to control those functions while you're driving. The Auxiliary Lever can control either of the two Auxiliary channels or it can control
a function, such as Steering Dual Rate or Steering Exponential. In addition, changing the High and Low Tweak values determines
the amount of travel and direction.
Changing the Auxiliary Lever Function Assignment:
1) FromwithintheSYSTEMmenu,scrollUPorDOWNtohighlighttheASSIGN
menu.
2) PresstheENTERkeytoopentheASSIGNmenu,thenscrollUPorDOWNto
highlight the LEVER menu.
3) PresstheENTERkeytoopentheLEVERmenu.LEVER[FUNCTION]>AUX2(or
other value depending on the selected Car Type) will be highlighted.
4) PresstheENTERkey,thenscrollUPorDOWNtochoosethedesiredfunction
you want to Assign to the Auxiliary Lever.
Changing the High and Low Tweak Values:
The High and Low Tweak values both determine how far and in which direction the Auxiliary Lever controls the function Assigned
toitwhentheAuxiliaryLeverismovedUpandDown,regardlessiftheAuxiliaryLeveriscontrollingaservo,suchasAuxiliary
Channel 2 or a function parameter, such as Steering Trim.
Forexample,ifyouAssignAUX2totheAuxiliaryLeverandadjusttheTweakvaluesto+50and-50,theAuxiliary 2 servo will be
centeredwhentheAuxiliaryLeveriscenteredandwilltravel50%inonedirectionwhentheAuxiliaryLeverismovedUpandtravel
50% in the other direction when the Auxiliary Lever is moved Down. Alternately, if you Assign TRIM ST to the Auxiliary Lever and
adjust the Tweak values to +50 and -50, the Auxiliary Lever will control Steering Trim from 0% to 50%.
TYP I
TYP II TYP III TYP IV TYP V TYP VI TYP VII TYP VIII TYP IX TYP X
Model Type
AUX2 --- --- --- --- --- --- --- --- ---
The table below shows the default Auxiliary Lever functions based on the selected Car Type. A complete list of functions that can be Assigned
to the Auxiliary Lever are shown in the Trim Switch, Auxiliary Dial and Auxiliary Lever Functions tables on pages 112 and 109.
Function