EXZES ZZ Radio System Manual

37
TR
EXZES ZZ
2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE
Telemetry System with Sanwa Synchronized Link Support
ASSIGN MENU
{
SWITCH, DIAL, LEVER AND TELEMETRY FUNCTION ASSIGNMENTS
}
SYSTEM
Changing the High and Low Tweak Values, Continued:
1) From within the LEVER menu, scroll UP or DOWN to highlight LEVER
[TWEAK(H)]>+100.
2) Pressthe ENTER key, then scroll UP orDOWN to choose the desiredHigh
Side Tweak value. Increasing the Tweak value will Increase travel in the
High Side direction and Decreasing the Tweak value will Decrease travel in
theHighSidedirection.UsingaNegativevaluewillchangethedirectionoftravel.
TWEAK(H)settingrangeis-100to+100.Thedefaultsettingis+100.
3) ScrollDOWNtohighlightLEVER[TWEAK(L)]>-94.
4) PresstheENTERkey,thenscrollUPorDOWNtochoosethedesiredLowSide
Tweak value. Decreasing the Tweak value will Increase travel in the Low
Side direction and Increasing the Tweak value will Decrease travel in the
LowSidedirection.UsingaPositivevaluewillchangethedirectionoftravel.
TWEAK(L)settingrangeis-100to+100.Thedefaultsettingis-100.
Telemetry Function Assignments
The EXZES ZZ allows the use of a remote external device (available separately) to control many transmitter functions. This allows
a driver helper or a pit crew member to remotely control transmitter functions, allowing you to concentrate more on driving. The
Telemetry Assign function allows you to program the transmitter to suit the programmed function and the specific requirements
of your external device, whether it features a push-button switch, a trim switch or dial, or a lever. Functions such as the Lap
Timer, Throttle Hold and much more can now be controlled remotely by a 3rd party.
External devices available separately. For more information about availability, contact your local Sanwa retailer.
The EXZES ZZ's Telemetry function must be turned ON, you must be using an Sanwa 2.4GHz FH4T receiver and the external
device must be paired for this function to work. For detailed information about connecting and using the external device
itself,refertotheUser'sGuideincludedwithyourexternaldevice.
2) PresstheENTERkeytoopentheASSIGNmenu,thenscrollUPorDOWNto
highlighttheTELEMETRYmenu.
3) PresstheENTERkeytoopentheTELEMETRYmenu.TELEMETRY>SWwillbe
highlighted.
4) PresstheENTERkey,thenscrollUPorDOWNtochoosetheTelemetryvalue
that matches the type of control on the connected external device. Choose from
SW (push-button switch), TRIM (trim switch or dial) or LEVER (lever).
TELEMETRYsettingrangeisSW,TRIMandLEVER.ThedefaultsettingisSW.
Changing the Telemetry Value:
The Telemetry value allows you program the EXZES ZZ's Telemetry Assign func-
tion to match the type of control on the connected external device. For ex-
ample, if the external device you have features a push-button switch, choose SW,
or if the external device features a lever, choose LEVER.
1) FromwithintheSYSTEMmenu,scrollUPorDOWNtohighlighttheASSIGN
menu.
SYSTEM