EXZES ZZ Radio System Manual

41
TR
EXZES ZZ
2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE
Telemetry System with Sanwa Synchronized Link Support
Changing the Audible Tones:
1) FromwithintheSYSTEMmenu,scrollUPorDOWNtohighlighttheBUZZER
menu.
2) PresstheENTERkeytoopentheBUZZERmenu.CLICK[TONE1]>1willbe
highlighted.
3) ScrollUPorDOWNtohighlighttheFunctionToneNumberyouwouldliketo
change. Refer to the table on the previous page for more information.
4) PresstheENTER key, thenscrollUP or DOWN tochoosethe desired Tone
value for either [TONE1] and/or [TONE2]. Increasing the Tone value will
Increase the Tone of the selected function and Decreasing the Tone value will
Decrease the Tone of the selected function.
BUZZER MENU
{
AUDIBLE KEY TONES AND ALARMS
}
SYSTEM
TONE1 and TONE2 setting range is 1 to 7. The default setting is 1. TONE1 changes the first half Tone and TONE2 changes
the second half Tone.
Changing the Volume:
1) FromwithintheBUZZERmenu,ScrollUPorDOWNtohighlighttheFunction
Volume Number you would like to change.
2) PresstheENTERkey,thenscrollUPorDOWNtochoosethedesiredVolume
value. Increasing the Volume value will Increase the Volume of the selected
function and Decreasing the Volume value will Decrease the Volume of the
selected function. Choosing OFF will Mute the selected function.
VOLUMEsettingrangeisOFFand1to10.Thedefaultsettingis8.
VIBRATOR MENU
{
VIBRATION ALERTS AND ALARMS
}
SYSTEM
The Vibrator function makes the transmitter vibrate like a cell phone to make you aware of different alerts and alarms that you
might encounter during use. For example, you can program the transmitter to vibrate when the an Interval Timer starts or stops
or when you reachaLapTimerGoalTime.Youcanalsoprogramthetransmittertovibratewhenthetransmitterreachesthe
programmed Voltage Alert value or when the transmitter is turned ON and more. In addition, you can adjust the level of vibration.
The Vibrate function is particularly useful if you've Muted any of the related audible alerts and alarms. The Vibrate function can
also be used along with the related audible alerts and alarms to provide a level of tactile feedback while you're driving.
3) Press the ENTER key, then repeat steps 1 and 2 to change the Volume value for any other desired functions.
5) Press the ENTER key, then repeat steps 3 and 4 to change the Audible Tones for any other desired functions.
SYSTEM