EXZES ZZ Radio System Manual
43
TR
EXZES ZZ
2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE
Telemetry System with Sanwa Synchronized Link Support
LCD MENU
{
DISPLAY OPTIONS
}
SYSTEM
2) PresstheENTERkeytoopentheLCDmenu.CONTRAST>15willbehighlighted.
3) PresstheENTERkey,thenscrollUPorDOWNtochoosethedesiredContrast
value. Increasing the Contrast value will Increase the contrast of the LCD and
Decreasing the Contrast value will Decrease the contrast of the LCD.
CONTRAST setting range is 10 to 20. The default setting is 15.
Changing the LCD Backlight Brightness:
1) FromwithintheLCDmenu,scrollUPorDOWNtohighlightBRIGHT>4.
2) Press the ENTERkey,thenscrollUPorDOWNtochoosethedesiredBrightness
value. Increasing the Brightness value will Increase the brightness of the LCD
Backlight and Decreasing the Brightness value will Decrease the brightness
of the LCD Backlight.
BRIGHT setting range is 1 to 5. The default setting is 4.
Changing the LCD Backlight Mode:
1) FromwithintheLCDmenu,scrollUPorDOWNtohighlightMODE>KEY-ON.
2) Press the ENTER key, then scroll UP or DOWN to choose the desired LCD
Modevalue.ChoosefromOFF,KEY-ONorALWAYS.WhensettoOFF,the
LCDBacklightwillbeturnedOFF.WhensettoKEY-ON,theLCDBacklightwill
turnONwhenakey-pressismade.WhensettoALWAYS,theLCDBacklight
will stay ON at all times
MODEsettingrangeisOFF,KEY-ONandALWAYS.ThedefaultsettingisKEY-ON.
Changing the LCD Backlight On-Time:
1) FromwithintheLCDmenu,scrollUPorDOWNtohighlightTIME>10sec.
2) Press the ENTER key, then scroll UP or DOWN to choose the desired LCD
Time value. The Time value (in seconds) determines how long the LCD Backlight
will stay ON before turning OFF automatically. This helps save battery power.
TIME setting range is 1 to 30 seconds. The default setting is 10 seconds.
Changing the LCD Contrast:
1) From within the SYSTEM menu, scroll UP or DOWN to highlight the LCD
menu.
SYSTEM