EXZES ZZ Radio System Manual

51
TR
EXZES ZZ
2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE
Telemetry System with Sanwa Synchronized Link Support
LOG SETUP MENU
{
TELEMETRY DISPLAY AND RECORDING OPTIONS
}
SYSTEM
Turning Telemetry Data Recording ON and OFF, Continued:
2) PresstheENTERkeytoopentheLOGSETUPmenu,thenscrollUPorDOWN
to highlight the REC menu.
3) PresstheENTERkeytoopentheRECmenu.REC>ONwillbehighlighted.
4) ScrollUP or DOWNto choose thedesired Record value,either ON orOFF.
When set to ON, Telemetry Data will be Recorded. When set to OFF, Telemetry
Data will not be Recorded.
REC setting range is ON or OFF. The default setting is ON.
RPM and Speed Telemetry Data Display Options
TheRPMmenuallowsyoutochangethewayRPMandSpeedinformationisdisplayedontheTELEMETRYscreenALLandRPM
pages.Forexample,youcanchoosetodisplayRPMs,MPHorKM/H.TheRPMGaugeandtheRPMDigitalDisplaynameswill
evenchangefromRPMtoMPHorKM/HdependingontheRPMUnitvaluechosen.Inaddition,youcandefinetheMaximum
Telemetry Data values that are displayed and the RPM sensor can be calibrated to ensure that the most accurate RPM or speed
inMPHorKM/Hisdisplayedforyourspecificmodel.
2) PresstheENTERkeytoopentheLOGSETUPmenu,thenscrollUPorDOWN
to highlight the RPM menu.
Changing the RPM Unit Value:
1) From within the SYSTEMmenu,scrollUPorDOWNtohighlighttheLOGSETUP
menu.
WhenyouchooseUNIT>MPHorUNIT>KM/HtheRATIO>valuewill
bereplacedwitha10COUNTDIST.>value.
UNITsettingrangeisRPM,MPHandKM/H.ThedefaultsettingisRPM.
3) PresstheENTERkeytoopentheRPMmenu.UNIT>RPMwillbehighlighted.
4) PresstheENTERkey,thenscrollUPorDOWNtochangetheRPMUnittothe
desired value. When RPM is chosen, the RPM of whatever the RPM Sensor is
attachedtowillbedisplayed.WhenMPHorKM/Hischosen,thespeedofyour
modelwillbedisplayedineitherMPHorKM/H,respectively.
Changing the Maximum Scale Value:
1) FromwithintheRPMmenu,scrollUPorDOWNtohighlighttheMAXSCALE>
value.ThisvaluewillvarydependingontheUNIT>valuechosenpreviously.
SYSTEM