EXZES ZZ Radio System Manual

58
EXZES ZZ
TR
2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE
Telemetry System with Sanwa Synchronized Link Support
4) Press the ENTER key to open the RX MODE menu. BIND will be displayed and
[ENTER] will be highlighted.
5) Turn your other transmitter ON, then navigate to that transmitter's BIND
menu and highlight the [ENTER] option. For more information, refer to your
transmitter'sUser'sGuide.
8) PresstheBACKkey,firstontheEXZESZZ,thenonyourothertransmitter,tocompletetheBindingprocess.TheBindLEDon
your other transmitter should illuminate solid and both LED1 and LED2 on the EXZES ZZ should be extinguished.
9) PresstheBACKkeytoreturntotheSTATUSscreen,thenscrollUPorDOWNtoopentheTELEMETRYscreen.Youshouldnow
beabletoviewtheothertransmitter'sSteeringandThrottleOutputDataontheEXZESZZTELEMETRYscreen.Inaddition,
if your other transmitter supports Telemetry, you should be able to view that transmitter's Telemetry Data on the EXZES ZZ
TELEMETRYscreenaswell.
6) Press the ENTER key on the
EXZES ZZ to begin the Bind-
ing process. SEARCH will
flash slowly.
7) Press the ENTER key on your
other transmitter. RECEIVE
will flash fast on the EXZES
ZZ.
3) PresstheENTERkeytoopentheLOGSETUPmenu,thenscrollUPorDOWN
to highlight the RX MODE menu.
Receiver Mode
WhenonlytheDISPLAYisturnedONusingtheDISPLAYkey,theEXZESZZcanbeplacedinReceiverMode,allowingittoBind
with another Sanwa FH3 or FH4T transmitter and read Telemetry Data from it. For example, if using an FH4T transmitter, such as the
MT-4,MT-4TelemetryDatacanbeviewedontheEXZESZZTELEMETRYscreenor,ifusinganFH3transmitter,suchastheMX-3X
orM11Xthatdoesn'tsupportTelemetry,SteeringandThrottleOutputDatacanbeviewedontheEXZESZZTELEMETRYscreen.
This capability allows the EXZES ZZ to be used as a separate Telemetry Viewer and Recorder.
To use this feature, first Bind your other transmitter to its receiver, then place the EXZES ZZ in Receiver Mode and Bind it to your
othertransmitter.WithyourothertransmitterturnedONandoperatingyourmodel,youcanusetheEXZESZZinDISPLAYmode
to view Telemetry Data from the other transmitter.
This section details placing the EXZES ZZ in Receiver Mode and making Steering and Throttle Point adjustments so that your
pairedtransmitter'sSteeringandThrottleOutputDataisdisplayedcorrectlyontheEXZESZZ'sTELEMETRYscreen.
ThemenusshowninthissectionareonlyvisiblewhenusingDISPLAYmode.TheyarenotvisibleiftheEXZESZZisturned
ONusingthePowerSwitch.ToturnDISPLAYmodeOFF,presstheDISPLAYkeyasecondtime.
LOG SETUP MENU
{
DISPLAY ONLY TELEMETRY OPTIONS
}
SYSTEM
UsingtheRXMODEmenu,youareabletoplacethetransmitterinReceiverMode,whichallowsyoutoBindtheEXZESZZtrans-
mitter to another Sanwa FH3 or FH4T transmitter and read Telemetry Data from it.
Enabling Receiver Mode:
1) WiththeEXZESZZturnedOFF,pressandHOLDtheDISPLAYkeytoturnonly
the Display ON.
2) FromwithintheSYSTEMmenu,scrollUPorDOWNtohighlighttheLOGSETUP
menu.