EXZES ZZ Radio System Manual

60
EXZES ZZ
TR
2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE
Telemetry System with Sanwa Synchronized Link Support
LOG SETUP MENU
{
DISPLAY ONLY TELEMETRY OPTIONS
}
SYSTEM
Calibrating the Throttle Output Data Display, Continued:
4) PresstheENTERkey.TheTHPOINTmenuwillbedisplayedandNEUTRAL
POINT>127willbehighlighted.
5) With your other transmitter turned ON and paired with the EXZES ZZ, do the
following:
A) Center the other transmitter's Throttle Control Stick, then press the ENTER
key on the EXZES ZZ.
B) Scroll DOWN to highlight HIGH END > 212. Pull and HOLD the other
transmitter'sThrottleControlStickallthewayBACK,thenpresstheENTER
key on the EXZES ZZ.
4) Repeatstep3toentertherestofthecharacters.Upto14characterscanbe
entered.Ifdesired,presstheBACKkeytore-gaincontroloftheunderscore,
thenusetheSELECTswitchorscrollUPorDOWNtomovetheunderscore
RIGHTorLEFT.Toaddaspace(orspaces)inyourUserName,usethe
character.
USER NAME MENU
{
TRANSMITTER USER NAMING
}
SYSTEM
TheUserNamefunctionallowsyoutoenteraUserNamethatisdisplayedontheSTATUSscreen,justabovetheM12Slogo.
Thisallowsyoutopersonalizeyourtransmitterbynamingit.TheUserNamecanconsistofupto14letters,numbersorsymbols.
Choose from capital letters, Lower case letters, numbers and various symbols.
IftheUserNameisleftblank,theSanwalogowillbedisplayedinitsplace.
The logo displayed will vary based on region.
C) Scroll DOWN to highlight BRAKE END > 42. Push and HOLD the other
transmitter's Throttle Control Stick all the way FORWARD, then press the
ENTER key on the EXZES ZZ.
The values displayed in the TH POINT fields don't represent actual
Throttle Control Stick movement and may vary. Throttle Control Stick
movement is displayed as a percentage below the TH POINT fields.
Entering a User Name:
1) From within the SYSTEM menu, scroll UP or DOWN to highlight the USER
NAME menu.
2) PresstheENTERkeytoopentheUSERNAMEmenu.Theunderscorewillbe
positionedunderthefirstspaceintheUserName.PresstheENTERkeya
second time
3) ScrollUPorDOWNandpresstheSELECTswitchRIGHTorLEFTtohighlighta
character in the Character List. Press the ENTER key to select the highlighted
character.ThatcharacterwillbedisplayedintheUserNameandtheunderscore
will advance to the next space. If at any time you can't move the underscore,
press the BACK key to re-gain control of the underscore.