EXZES ZZ Radio System Manual

64
EXZES ZZ
TR
2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE
Telemetry System with Sanwa Synchronized Link Support
PC LINK
{
SAVE TRANSMITTER DATA AND UPDATE FIRMWARE
}
SYSTEM
8) PresstheStartbuttononthePCLINKManager3softwareandallowtheDataTransfertocomplete.Oncecompleted,EXECUTED
will be displayed momentarily on the EXZES ZZ and The Operation Was Completed will be displayed on your PC.
Saving a Model Template, Continued:
5) Press the ENTER key. PC RECEIVE TEMPLATE SAVE OK? NO/YES will be
displayed.
6) To select the Model Template you want to Save, press the SELECT switch
Right or Left.
7) ScrollUPorDOWNtohighlightYES,thenpresstheENTERkey.PCSTARTwill
be displayed.
Ifyouwanttogobackorifyoudon'twanttoSavetheModelTemplateforanyreason,chooseNOorpresstheBACKkey.
Loading Model Templates
The Load Template function allows you to Load Model Templates from your PC onto your transmitter. For example, if you've
archived a Model Template onto your PC or if you've downloaded a new Model Template from the Internet and saved it onto your
PC, you can Load it into the transmitter's Model Template menu.
Loading a Model Template:
1) FromwithintheSYSTEMmenu,scrollUPorDOWNtohighlightthePCLINK
menu.
WARNING: When you Load a Model Template from your PC, that Model Template will overwrite the Programming Data
of the Model Template you Select in step 6 below. If you don't want to overwrite the selected Model Template, either choose
another Model Template to overwrite or use the Save Template function to archive that Model Template to your PC.
2) PresstheENTERkeytoopenthePCLINKmenu,thenscrollUPorDOWNto
highlight the LOAD TPL menu.
3) WiththePCLINKManager3softwarerunningandthetransmitterconnected,
pressthe(TEMPLATELOAD)buttononthePCLINKManager3software.
4) Navigate to the folder where your Saved Model Template is, then select the
file and Press the Open button. Do not Press the Start button on the PC LINK
Manager 3 software yet!
8) Press theStartbuttononthePCLINKManager3softwareandallowtheDataTransfertocomplete.Oncecompleted,EXECUTED
will be displayed momentarily on the EXZES ZZ and The Operation Was Completed will be displayed on your PC.
5) PresstheENTERkey.PCTRANSMITTEMPLATELOADOK?NO/YESwillbe
displayed.
6) To select the Model Template you want to overwrite, press the SELECT
switch Right or Left.
7) ScrollUPorDOWNtohighlightYES,thenpresstheENTERkey.PCSTARTwill
be displayed.
Ifyouwanttogobackorifyoudon'twanttoLoadtheModelTemplateforanyreason,chooseNOorpresstheBACKkey.
Updating Transmitter Firmware
TheUpdatefunctionallowsyoutoUpdatethetransmitter'sFirmwaretothelatestversionavailable.Thisallowsyoutokeepyour
transmitter up to date with the latest features.
The Firmware version that your transmitter is currently running is shown in the INFORMATION menu. For more information, see
the INFORMATION Menu section on page 65.