EXZES ZZ Radio System Manual

66
EXZES ZZ
TR
2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE
Telemetry System with Sanwa Synchronized Link Support
Resetting the On-Time, Continued:
2) PresstheENTERkeytoopentheINFORMATIONmenu.ONTIME>00:00(or
the actual Cumulative On-Time) will be highlighted and the current Firmware
version will be displayed.
3) Press and HOLD the ENTER key to Reset the ON TIME to 00:00.
INFORMATION MENU
{
FIRMWARE VERSION, BOOT SCREEN, AND BASIC MODE
}
SYSTEM
1) From within the INFORMATION menu, scroll UP or DOWN to highlight
BOOT>DEMO.
Changing the Boot Options:
The Boot function allows you to change the default start-up behavior of the transmitter when it's turned ON.
2) PresstheENTERkey,thenscrollUPorDOWNtochoosethedesiredBoot
value. When DEMO is selected, the Logo will be displayed during the start-up
process,thendefaulttotheSTATUSscreen.WhenRESUMEisselected,
the transmitter will display the last Programming Menu you were in when the
transmitter was turned OFF. When TOP is selected, the transmitter will default
totheSTATUSscreenwhenturnedON.
BOOTsettingrangeisDEMO,RESUMEandTOP.ThedefaultsettingisDEMO.
Turning BASIC Mode ON and OFF:
The EXZES ZZ features a BASIC Mode that simplifies transmitter use. The accompanying BASIC menu contains some of the
more common, general-use Programming Menus that a user will require for basic programming.
When BASIC Mode is turned ON, not only are these various Programming Menus in one easy place to find them, so you don't
needtospendtimefindingtheminoneoftheotherfourmenus,butitalsoremovestheTELEMETRYandASSIGNscreensto
simplify transmitter use.
1) From within the INFORMATION menu, scroll UP or DOWN to highlight
BASIC>OFF.
2) PresstheENTERkey,thenscrollUPorDOWNtoselectthedesiredoption,
either ON or OFF. When ON is selected, BASIC Mode will be turned ON and
when OFF is selected, BASIC Mode will be turned OFF.
BASIC setting range is ON and OFF. The default setting is ON.