EXZES ZZ Radio System Manual

73
TR
EXZES ZZ
2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE
Telemetry System with Sanwa Synchronized Link Support
Choosing the Four Wheel Steering Mixing Options:
1) FromwithintheSETUPmenu,scrollUPorDOWNtohighlightthe4WSMIX
menu. In the example shown in this section, we've selected Car Type X in the
CARTYPEmenu.
4WS MIX MENU
{
FOUR WHEEL STEERING MIXING
}
SETUP
The Four Wheel Steering Mixing function provides you with two Steering channels. It allows you to control either the Front or Rear
Steering independently or Mix the Front and Rear Steering to have Parallel Four Wheel Steering (Crab) or Tandem Four Wheel
Steering.UseoneofthefiveTrimSwitchesortheAuxiliaryDialtocyclethroughthedifferentFourWheelSteeringoptionswhile
you're driving. The Four Wheel Steering Mixing function can be toggled OFF and ON while you're driving by Assigning 4WS to
one of the three Push-Button Switches.
When using the Four Wheel Steering function, it's important to adjust the F/ST channel and R/ST channel Sub-Trim
values to center both Steering servos when the Steering Control Stick is centered. This will ensure that your model
tracks straight. In addition, you are able to adjust many functions, such as Exponential, Servo Speed and much more for
each Steering channel independently. This allows for the optimum Four Wheel Steering Mixing setup.
The Four Wheel Steering Mixing function is available only when either Car Type VIII or Car Type X is selected.
2) Press the ENTER key to open the 4WS MIX menu. The last Four Wheel Steering
Mixing option selected will be highlighted.
3) Pressthe ENTERkey, then scroll UP or DOWN to highlight the Four Wheel
Steering Mixing option you would like to use.
4) Press the ENTER key to Activate that option.
UsetheServoMonitoratthebottomofthe4WSMIXINGscreentoview
Steering channel output.
The following Four Wheel Steering Mixing options are available:
REAR Wheel Steering - When Active, only the Rear Steering will operate.
NORMAL (Parallel/Crab) Four Wheel Steering - When Active, both the
Front and Rear Steering will operate in Parallel.
REVERSE (Tandem) Four Wheel Steering - When Active, both the Front
and Rear Steering will operate in Tandem.
FRONT Wheel Steering - When Active, only the Front Steering will
operate.
If the Steering servos do not operate as described above, you can use the Servo Reversing function to change the
direction that each servo operates. For more information, see the REV Menu section on pages 69 and 70.
SETUP