EXZES ZZ Radio System Manual

77
TR
EXZES ZZ
2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE
Telemetry System with Sanwa Synchronized Link Support
1) FromwithintheSETUPmenu,scrollUPorDOWNtohighlighttheLAPTIMER
menu.
2) PresstheENTERkeytoopentheLAPTIMERmenu.GOALTIME>60'00willbe
highlighted.
3) Pressthe ENTER key, then scroll UP orDOWN to choose the desired Goal
Time value in Minutes : Seconds.
GOAL TIME setting range is 10 Seconds to 60 Minutes (00'10 to 60'00) and is
adjustable in 10 second intervals. The default setting is 60 Minutes.
Setting the Pre-Alarm Time:
ThePre-AlarmfunctionisusedtoalertyouthatyourGoalTimeisapproaching.YoucanprogramthePre-Alarmtosoundonce
every second the desired number of seconds prior to reaching your Goal Time. For example, if the Pre-Alarm value is set to
5 Seconds, a short audible Tone will sound every second, 5 seconds prior to reaching your Goal Time. If desired, the Pre-Alarm
value can be set to OFF to turn the Pre-Alarm OFF.
1) From within the LAP TIMER menu, scroll UP or DOWN to highlight PRE
ALARM>5sec.
2) PresstheENTERkey,thenscrollUPorDOWNtochoosethedesiredPre-Alarm
value in Seconds.
PRE ALARM setting range is OFF and 1 to 20 Seconds. The default setting
is 5 Seconds.
Choosing the Optional Throttle Control Stick Start:
The Throttle Control Stick can be used to Start the Lap Timer after the Lap Timer as been placed in Standby. This is much more
convenient and accurate than pressing the Lap Timer Switch again to Start the Lap Timer when you're trying to start your race.
1) FromwithintheLAPTIMERmenu,scrollUPorDOWNtohighlightSTART
TRIGGER>OFF.
2) Pressthe ENTERkey, then scroll UP or DOWN tochoose the desired Start
Trigger value, either ON or OFF.
START TRIGGER setting range is OFF and ON. The default setting is OFF.
Setting the Goal Time:
WhentheLapTimeriscountingUp,alongaudibleTonewillsoundwhentheGoalTimeisreached.Forexample,ifyousetthe
Goal Time value for 5 Minutes, a long audible Tone will sound when the Lap Timer reaches 5 minutes.
When the Goal Time is reachedtheLapTimerwillcontinuecountingUp,butyouwillnolongerbeabletocontinuecounting
Lap Times. The next time you press the Lap Timer Switch, the Lap Timer will Stop.
LAP TIMER MENU
{
VIEW LAP TIMES AND CHOOSE LAP TIMER OPTIONS
}
SETUP
Starting the Lap Timer and Counting Lap Times:
1) In the default configuration, the Lap Timer Switch (Push-Button Switch Sw3) controls the Lap Timer. Press and HOLD the Lap
Timer Switch for 3 seconds. An audible Double-Tone will sound and LAP
[
STANDBY
]
will be displayed momentarily in a pop-up
window, indicating the Lap Timer is in Standby. To start the Lap Timer, press the Lap Timer Switch a second time or pull the Throttle
Control Stick if you've Enabled the Start Trigger function. An audible Double-Tone will sound and the Lap Timer will start counting
Up.
2) Press the Lap Timer Switch a second time to store the first Lap Time and begin counting a second Lap Time. Each time you
press the Lap Timer Switch, an audible Tone sounds, the previous Lap Time is stored, a new Lap Time begins and the current
Lap Time is displayed momentarily in a pop-up window.
SETUP