EXZES ZZ Radio System Manual

88
EXZES ZZ
TR
2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE
Telemetry System with Sanwa Synchronized Link Support
For the utmost in precision control, Channel Curves can be programmed separately for the Throttle High Side and the Throttle
Brake Side. A graph that depicts the control output and Point Curve relationship is featured to help visualize the changes
you make.
Point Curve Programming Values can be changed while you're driving by Assigning these functions to a Trim Switch, the
Auxiliary Dial or the Auxiliary Lever. For more information, see the ASSIGN Menu section on pages 31 through 40.
CURVE MENU
{
EXPONENTIAL, ADJUSTABLE RATE CONTROL AND CURVE
}
RACING
Point Curve percentage values can be adjusted from Mild through Linear to Quick
to allow you to set the most effective control response for your model. For example,
if your model over-steers, reduce the Point Curve percentage values and if your
model under-steers, Increase the Point Curve percentage values.
For another example, reduce the Throttle High Side Point Curve percentage values
on a slippery track or with a model that has a higher-torque motor or engine, and
Increase the Throttle High Side Point Curve percentage values on a high-grip track
or with a model that has a lower-torque motor or engine.
Quick
Linear
Mild
100%
100%
N
Amount of Servo Operation
Amount of Control Operation
P1
P2
P3
P4
P5
P6
P7
P8
P9
Choosing the Channel and the Curve Type:
1) FromwithintheRACINGmenu, scroll UP orDOWNtohighlighttheCURVE
menu.
2) Press theENTER keyto open theCURVE menu.The < ST > channel will be
selected.
3) Press the SELECT switch RIGHT or LEFT to choose the desired channel you
would like to program a Point Curve for.
4) FromwithintheCURVEmenu,scrollUPorDOWNtohighlighttheTYPE>value,
thenpresstheENTERkeyandscrollUPorDOWNtochooseTYPE>CRV.
Changing the Point Percentage Values:
The Point percentage values determine the type of Point Curve, either Quick, Mild or Linear (see diagram above). Programming a
Point percentage value that is Lower than the default value for that specific Point will Soften the control feel (Mild) and programming
a Point percentage value that is Higher than the default value for that specific Point will Heighten the control feel (Quick).
1) FromwithintheCURVEmenu,scrollUPorDOWNtohighlightthedesiredPointyouwanttochangethePointpercentage
value for. Choose from P1 through P9.
POINT 1 through 9 setting range is 0% to 100%. The default setting for P1 is 10%, for P2 is 20%, for P3 is 30%, for P4 is 40%,
for P5 is 50%, for P6 is 60%, for P7 is 70%, for P8 is 80% and for P9 is 90%.
3) Press the ENTER key, then repeat steps 1 and 2 to choose the Point percentage value for any other desired Points.
YouareabletoadjustPointpercentagevaluesfortheThrottleHighSideandtheThrottleBrakeSideseparately.Inaddition,
you can even program Point Curve for one Side and Exponential or ARC for the other Side.
2) PresstheENTERkey,thenscrollUPorDOWNtoIncreaseorDecreasethe
Pointpercentagevalue.UsingaLowerPointpercentagevaluewillSoftenthe
control feel and using a Higher Point percentage value will Heighten the
control feel.