EXZES ZZ Radio System Manual

9
TR
EXZES ZZ
2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE
Telemetry System with Sanwa Synchronized Link Support
Back Key:PressingtheBACKkeyreturnstheProgrammingCursortothepreviousmenu.PresstheBACKkeyrepeatedlytoreturn
totheSTATUSscreen.
Battery Compartment: Houses the 2S Li-Fe battery pack that powers the transmitter.
Bind Button:UsedintheprocessofBindingthetransmitterandreceiver.
Bind LED: Displays the current operating status of the receiver.
Coaxial Cable: The portion of the receiver antenna that extends the Antenna Reception Wire. The Coaxial Cable can be bent into
gentle curves, however, do not bend it acutely, or repeatedly bend it or the antenna core can be damaged.
Display Key: Turns the transmitter's LCD Screen ON without actually turning the transmitter ON. This allows you to check and/or
change programming options without actually turning the transmitter ON. To turn only the LCD Screen ON, press and HOLD the
DISPLAYkeyforapproximately3seconds.ToturntheLCDScreenOFF,presstheDISPLAYkeyonce.
Earphone Jack:Usedwithearphones(notincluded)tohearaudiblekeytones,alertsandalarms.
Grip: The Grip is molded from rubber in an ergonomic shape for increased comfort, control and feel.
LED1: Displays the current RF signal output status of the transmitter. When illuminated, an RF signal is being transmitted. When
extinguished, no RF signal is being transmitted. In addition, LED1 is used to indicate various transmitter conditions.
LED2: Displays the current status of the Telemetry connection. When illuminated, no Telemetry connection is present. When
extinguished, the Telemetry connection is Active. In addition, LED2 is used to indicate various transmitter conditions.
LCD Screen: The heart of the programming and display features of the transmitter. All programming and transmitter display
functions are shown on the LCD Screen. The EXZES ZZ features a large, backlit LCD Screen with smooth scrolling.
Neck Strap Anchor:Usedtoattachyourneckstrap(availableseparately)tothetransmitter.
PC LINK Input:WhenusedwithanUSBcablewithaMiniUSBconnector(availableseparately),thePCLINKInputallowsyouto
save Telemetry Data Logs, Model Programming Data and Model Templates to your PC. In addition, it also allows you to load
saved Model Programming Data and Model Templates from your PC and update the EXZES ZZ's Firmware version.
Power Switch: Turns the transmitter ON and OFF.
Push-Button Rotary Dial:ThePush-ButtonRotaryDial(alsoreferredtoastheUPkey,DOWNkeyandENTERkey)isusedalong
withtheBACKkeyandtheSELECTswitchtofacilitatetransmitterprogramming.Itallowsyoutoquicklyandeasilynavigatethe
variousProgrammingMenusandswitchbetweentheSTATUS,ASSIGNandTELEMETRYscreens(withBASICModeOFF).
Push-Button Switches: The transmitter features three Push-Button Switches in different locations (Sw1, Sw2 and Sw3). Each
Push-Button Switch is programmable and will perform a different function depending on what function is assigned to it. For
example, Sw1 can be used to operate a reverse servo in a gas- or glow-powered model and Sw3 can be used to toggle Anti-Lock
Braking ON and OFF. Sw2 is a Rocker Switch that can be pressed from either the Front or the Back.
Racing Mode LED: Displays the currently Active Racing Mode. The color of the LED will vary depending on which of the five
Racing Modes is Active. When extinguished, Racing Mode is Inhibited.
Select Switch:Used alongwiththePush-ButtonRotaryDialandtheBACK keytofacilitatetransmitterprogramming.Usethe
SELECTswitchtoscrollthroughtheSTATUSscreen'smainmenus,scrollthroughtheTELEMETRYpagesandmakeselections
in many of the Programming Menus.
Spring Tension Adjuster: Adjusts the spring tension of the throttle or steering control sticks. The spring tension can be adjusted
to suit your preference. For more information, see page 12.
Steering Response Mode LED: Displays the currently Active Steering Response Mode. The color of the LED will vary depending
on which of the three Response Modes is Active.
Steering Control Stick: Controls the steering function of your model. The Steering Control Stick length and gimbal angle are
adjustable to suit your preference. For more information, see page 12.
Throttle Control Stick: Controls the Throttle and Brake (if equipped) functions of your model. The Throttle Control Stick length and
gimbal angle are adjustable to suit your preference. For more information, see page 12.
Throttle Response Mode LED: Displays the currently Active Throttle Response Mode. The color of the LED will vary depending
on which of the three Response Modes is Active.
TRANSMITTER AND RECEIVER OVERVIEW DIAGRAM DESCRIPTIONS GENERAL
GENERAL