EXZES ZZ Radio System Manual

96
EXZES ZZ
TR
2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE
Telemetry System with Sanwa Synchronized Link Support
ST
#ST
#L-ST
#F/ST
TH
#TH
#F/TH
AUX1
BR
BR2
#AUX1
#BR
#BR2
#R-ST
#R/ST
#R/TH
AUX2
#AUX2
Steering
# Steering
# Left Steering
# Front Steering
Throttle
# Throttle
# Front Throttle
Auxiliary 1
Brake
Brake 2
# Auxiliary 1
# Brake
# Brake 2
# Right Steering
# Rear Steering
# Rear Throttle
Auxiliary 2
# Auxiliary 2
RawOutputData,PlusCURVEandSPEED
RawOutputData,PlusTRIM,EPA,D/R,CURVEandSPEED
RawOutputData,PlusTRIM,EPA,D/R,CURVEandSPEED
RawOutputData,PlusTRIM,EPA,D/R,CURVEandSPEED
RawOutputData,PlusCURVE,SPEEDandBR-MIX
RawOutputData,PlusTRIM,EPA,D/R,CURVE,SPEED,ALB,OFFSET,BR-MIXandTH-HOLD
RawOutputData,PlusTRIM,EPA,D/R,CURVE,SPEED,ALB,OFFSET,BR-MIXandTH-HOLD
RawOutputData,PlusCURVEandSPEED(Referred to as AUX in some Car Types)
RawOutputData,PlusCURVE,SPEEDandBR-MIX
RawOutputData,PlusCURVE,SPEEDandBR-MIX
RawOutputData,PlusTRIM,EPA,D/R,CURVEandSPEED
RawOutputData,PlusTRIM,EPA,D/R,CURVE,SPEED,ALB,OFFSET,BR-MIXandTH-HOLD
RawOutputData,PlusTRIM,EPA,D/R,CURVE,SPEED,ALB,OFFSET,BR-MIXandTH-HOLD
RawOutputData,PlusTRIM,EPA,D/R,CURVEandSPEED
RawOutputData,PlusTRIM,EPA,D/R,CURVEandSPEED
RawOutputData,PlusTRIM,EPA,D/R,CURVE,SPEED,ALB,OFFSET,BR-MIXandTH-HOLD
RawOutputData,PlusCURVEandSPEED
RawOutputData,PlusTRIM,EPA,D/R,CURVEandSPEED
CH. NAME
CH. CH. OUTPUT DATA
The table below shows the Channel Output Data of each Master channel. This is the Data that will be duplicated on the Slave
channel when Compensation Mixing is turned ON. Channels denoted with a Pound sign (#) indicate that not only is the Raw
Output Data duplicated on the Slave channel, but the other functions described are also duplicated on the Slave channel. For
example,ifMASTER>#STisselected,any Master channel Steering Trim, End Point Adjustments, Dual Rate, Curve and Speed
values,plustheRawOutputDatawillbeduplicatedontheSlavechannel.Alternately,ifyouselectMASTER>ST,onlyCurveand
Speed values, plus the Raw Output Data will be duplicated on the Slave channel.
Changing the Master Channel:
1) FromwithintheRACINGmenu,scrollUPorDOWNtohighlighteitherthe
C-MIX1 or the C-MIX2 menu depending on which Compensation Mixer you
want to program. In this section, we show programming Compensation Mixer 1.
Available channels vary based on the Car Type currently chosen. The table below shows the available channels for each Car
Type. See also the second table below that describes the Channel Output Data of each of these channels.
Channels denoted with a Pound sign (#) can be selected only as Master channels. All other channels can be selected as Master
or Slave channels.
ST
#ST
TH
#TH
AUX1
#AUX1
AUX2
#AUX2
CH 1
CH 2
CH 3
CH 4
CH
TYP I
TYPE
TYP II TYP III TYP IV TYP V TYP VI TYP VII TYP VIII TYP IX TYP X
ST
#ST
TH
#TH
BR
#BR
AUX
#AUX
ST
#ST
TH
#TH
BR2
#BR2
AUX
#AUX
ST
#ST
TH
#TH
BR
#BR
BR2
#BR2
ST
#L-ST
TH
#TH
----
#R-ST
AUX
#AUX
ST
#L-ST
TH
#TH
----
#R-ST
BR
#BR
ST
#L-ST
TH
#TH
----
#R-ST
BR2
#BR2
ST
#F/ST
TH
#TH
----
#R/ST
AUX
#AUX
ST
#ST
TH
#F/TH
----
#R/TH
AUX
#AUX
ST
#F/ST
TH
#F/TH
----
#R/ST
----
#R/TH
ST=Steering•TH=Throttle•BR=Brake•BR2=Brake2•R-ST=Right•L-ST=Left•R/STorR/TH=Rear•F/STorF/TH=Front
C-MIX1 AND C-MIX2 MENU
{
COMPENSATION MIXING 1 AND COMPENSATION MIXING 2
}
RACING