User's Manual

49
TR
TR
TR
90478 2.4GHZ FH4T RADIO SYSTEM USER'S GUIDE
SYSTEM
PG. 49
PG. 52
PG. 53
PG. 59
PG. 59
PG. 60
PG. 61
PG. 61
PG. 62
PG. 63
PG. 68
The different System Menus allow you to program options related directly to the use and
setup of the 90478 transmitter. From changing the Modulation Type, to adjusting LCD
properties and changing Key Assignments to suit your specific setup, it's all here.
1) To access the various System Menus, turn the transmitter ON, then press the ENTER key
(Push-Button Rotary Dial) to open the Programming Menu list. Scroll DOWN to SYSTEM,
then press the ENTER key a second time to open the System Menu. A list of System
Menus will be displayed and the first System Menu will be highlighted.
MENU MENU NAME MENU DESCRIPTION
SYSTEM MENUS
PAGE
SYSTEM MENUS OVERVIEW
SYSTEM
2) Use the Push-Button Rotary Dial to scroll UP or DOWN to highlight the desired System Menu, then press the ENTER key to
open the highlighted System Menu.
01.MODEL
02.BIND
03.KEY ASSIGN
04.TRIM TYPE
05.AUX TYPE
06.TH TYPE
07.BUZZER
08.BATTERY
09.LCD
10.TELEMETRY
11.VR ADJUST
Model
Binding
Key Assignments
Servo Trim Type
Auxiliary Type
Throttle Type
Audible Key Tone
Voltage Alarm
Contrast
Telemetry
Variable Rate Adjust
Model Select, Model Naming, Model Copy and Model Clear
Bind, Select Modulation Type and Servo Operating Mode
Assign Functions to the Switches, Rotary Dial and Auxiliary Lever
Change the Servo Trim Type
Choose Auxiliary 1 and Auxiliary 2 Programming Functions
Change the Throttle Servo Travel Proportion
Adjust Audible Key Tone Volume and Tone
Specify Transmitter Battery Low Voltage and Limit Alarms
Adjust LCD Contrast and Backlight Options
Program Telemetry Display Options
Calibrate Steering, Throttle and Auxiliary Lever Controls
The Model menu allows you to select different models using the Model Select function, name your saved models using the
Model Naming function, and copy Programming Data from one model to another, or clear Programming Data from one or
more models using the Model Copy and Model Clear functions. Programming Data for up to 18 different models can be stored
in the transmitter's memory. This allows you to use the transmitter with different models and quickly and easily select the
Programming Data for each of them. In addition, a Model Select Shortcut function is also featured for quick access to the Model
Select (Direct Model) function.
The Model Select function allows you to load the Programming Data for the particular model you wish to drive. The Model Select
menu displays the currently selected model, along with a list of available models that can be selected. The Modulation Type for
each model is also displayed. The transmitter can store Programming Data for up to 18 different models.
When a model is selected and loaded, the Programming Data for that model will be loaded immediately. Modulation
Type, Servo Operating Mode, Key Assignments, Trim Type, Auxiliary Type and Throttle Type options, in addition to all
Programming Menu function options are model-specific.
Selecting a Model:
1) From within the SYSTEM menu, scroll UP or DOWN to highlight the MODEL menu.
2) Press the ENTER key to open the MODEL menu. MODEL SELECT will be highlighted.
3) Press the ENTER key. The MODEL SELECT menu will be displayed and the currently
selected model in the Model Select List will be highlighted.
01.MODEL
(
MODEL SELECT, NAMING, COPY AND CLEAR
)
SYSTEM
MODEL SELECT
(
Model Select
)
MT-4S User's Guide.indd 49 2015/10/27 14:39:07