User's Manual

M12S 2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE

Scrolls between STATUS, ASSIGN and TELEMETRY screens.

Scrolls the Programming Cursor RIGHT or UP and LEFT or

DOWN. Increases or Decreases Programming Values.

PROGRAMMING KEY NAME FUNCTION

Push-Button Rotary Dial

(Push ENTER)

Opens the Selected menu or programming option. Press and

HOLD to reset the Selected programming option to its default

value.

BACK Key

Returns to the previous menu. Repeatedly press to return to the

STATUS screen.

Push-Button

Rotary Dial

(Scroll UP/DOWN)

Moving around the various screens and programming the transmitter is accomplished using the ENTER key (Push-Button Rotary

Dial), the SELECT switch and the BACK key.

PRO TIP: While navigating Programming Menus and changing Programming Values, keep the following in mind: to choose

a menu from the STATUS screen, use the SELECT switch. To open a menu, press the ENTER key. To choose an option

to program, scroll UP or DOWN to highlight the desired option, then press the ENTER key. The highlighted option will flash,

indicating the Programming Value can be changed. Once you've changed the Programming Value, press the ENTER key again

or press the BACK key and the highlighted option will stop flashing, indicating you can scroll UP or DOWN to highlight another

programming option. To reset a programming option to its default value, highlight the option and press the HOLD the ENTER key.

Used to Select various menus. In addition, the SELECT switch's

function will vary depending on the menu chosen and will be

indicated in the menu's Message Display Window.

In the default configuration, when you turn the M12S transmitter ON, the transmitter will start-up and display the BOOT screen

temporarily, then display the STATUS screen.

SELECT Switch

BOOT Screen: The BOOT screen is displayed when the transmitter is turned ON. The BOOT screen can be disabled. For more

information, see the

BOOT Menu

section on page 56.

STATUS Screen: The STATUS screen is displayed after the BOOT screen and displays important information about the

transmitter. It's also a base from which you access other Programming Menus. For more detailed information, see the

STATUS

Screen Overview

section on the next page.

STATUS Screen

BOOT Screen

PROGRAMMING KEYS OVERVIEW AND FUNCTIONS GENERAL

DISPLAY SCREENS OVERVIEW GENERAL