User's Manual

18
M12S 2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE
Use the information in this section to familiarize yourself with the layout and different indicators and displays that comprise the
STATUS screen. The STATUS screen displays all pertinent information, such as the Model Name, Modulation Type, Timer, Voltage
and much more.
The STATUS screen will always be displayed after the BOOT screen unless you change that option in the SYSTEM BOOT menu.
For more information, see the
BOOT Menu section on page 56.
Model Number Model Name
Voltage Indicator
Telemetry Signal Indicator
Modulation Type Indicator
On-Time Indicator
Audio Indicator
RF Indicator
Trim Display
Dual Rate Display
Mode Display
Car Type Indicator
Racing Mode Indicator
Trim Display
DISPLAY SCREENS OVERVIEW GENERAL
ASSIGN Screen: The ASSIGN screen displays the functions that are currently Assigned to the Push-Button Switches, the Trim
Switches, the Auxiliary Dial and the Auxiliary Lever, all in one convenient location.
TELEMETRY Screen: The TELEMETRY screen displays Telemetry Data, such as RPM or Speed, Temperature, Receiver Voltage
and more. Use the SELECT switch to switch between ALL and LAP, ST, TH, RPM, VOLT, TMP1 and TMP2 pages.
Telemetry integration requires the use of an Airtronics 2.4GHz FH4T Telemetry-capable surface receiver, such as the RX-461
or RX-462. Steering and Throttle Output and Lap Times can still be viewed when used other types of receivers.
TELEMETRY Screen
ASSIGN Screen
From the STATUS screen, use the Push-Button Rotary Dial to scroll UP or DOWN to display the ASSIGN and TELEMETRY
screens. To return to the STATUS screen, either scroll to it or press the BACK key.
SCROLL
STATUS Screen Overview Diagram Descriptions:
Audio Indicator: Indicates whether Audible Key Tones and Transmitter Alarms are Muted or not.
Car Type Indicator: Indicates the current Car Type Selected.
Dual Rate Display: Displays the current Dual Rate percentage value of channels that Dual Rate can be programmed for. Channels
displayed will vary based on the currently Selected Car Type.
Mode Display: Displays any special Programming Modes that are Active, such as Throttle Offset or Anti-Lock Braking.
Model Name: Displays the Name of the currently Selected Model.
Model Number: Displays the number of the currently Selected Model.
Modulation Type Indicator: Indicates the current Modulation Type that the transmitter is set to.
STATUS Screen Overview Diagram: