User's Manual

21
M12S 2.4GHZ FH4T RADIO CONTROL SYSTEM USER'S GUIDE
TR
The TELEMETRY screen displays Telemetry Data, such as RPM or Speed, Temperature, Receiver Voltage and more.
For information about making Telemetry option changes that effect how and what Telemetry Data is displayed on the various
TELEMETRY pages, see the
LOG SETUP Menu section on pages 48 ~ 56.
Telemetry integration requires the use of an Airtronics 2.4GHz FH4T Telemetry-capable surface receiver, such as the RX-461
or RX-462. Steering and Throttle Output and Lap Times can still be viewed when used other types of receivers.
TELEMETRY SCREEN OVERVIEW GENERAL
Receiver Voltage Display
Temperature 1 Display
Steering Output Display
Throttle Output Display
RPM/Speed Gauge
RPM/Speed Display
Lap Time Display
Temperature 2 Display
From the STATUS screen, use the Push-Button Rotary Dial to scroll UP or DOWN to display the TELEMETRY screen.
Use the SELECT switch to switch between ALL and LAP, ST, TH, RPM, VOLT, TMP1 and TMP2 pages. These pages display more
detailed Telemetry Data and allow you to review Telemetry Data and Save the current Telemetry Data Log to your PC for archiving
or viewing at a later time.
The layout of the information displayed on the ST, TH, RPM, VOLT, TMP1 and TMP2 pages is similar, so only the STEERING
page is shown in this section.
Elapsed Time
Status Indicator
Direction/Max/Min Indicators
Data Point Scale
Numerical Telemetry Data
Lap Number
Lap Time
Page Indicator
Cursor Indicator
Lap Indicator
Telemetry Data Graph
TELEMETRY Screen Overview Diagram Descriptions:
Cursor Indicator: Indicates the current position of the Cursor when reviewing Telemetry Data. The Cursor Indicator will only be
displayed when in VIEW Mode.
Data Point Scale: Indicates the time in Seconds between recorded Telemetry Data Points. This value is fixed at 0.5 seconds.
Direction/Max/Min Indicators: Indicates Control Movement Direction or Programmed Maximum and Minimum Telemetry Data
values, depending on the current TELEMETRY page being displayed.
Elapsed Time: Displays the current position in Time of the Cursor Indicator within the current Telemetry Data Log.
Lap Indicator: Indicates the position along the Telemetry Data Stream that a Lap Time was counted.
Lap Number: Displays the current Lap Number.
Lap Time: Displays the Lap Time of the currently Selected Lap Number.
Lap Time Display: Displays the current Lap Time in Minutes, Seconds and 1/100th of a Second, and the current Lap Number.
For information about viewing Lap Times, see the
Viewing Lap Times section on page 73.