User's Manual Part 2

36
MT-4S 2.4GHZ FH4T RADIO SYSTEM USER'S GUIDE
T R
[[ProGraMMinG MenuS
Point (Point auXiliary), Continued....
Controlling the Point Auxiliary Function
1) In the default configuration, Auxiliary 2 is controlled by the Rotary Dial. Turn the Rotary Dial clockwise to cycle For-
ward through the programmed Point Auxiliary positions and turn the Rotary Dial counter-clockwise to cycle Backward
through the programmed Point Auxiliary positions. The Auxiliary 2 servo will move to the specified Point positions as
you cycle through the different Points. In addition, Auxiliary 2 can be assigned to one of the four Trim Switches. The Point
Auxiliary function can be toggled OFF and ON by assigning Auxiliary 2 to one of the two Push-Button Switches. For
IMPORTANT: To operate correctly, the TRIM or DIAL Step value must be set to 1. If set to a value other than 1, Point
positions will be skipped as you cycle through them. For more information, see the Key Assignments section on pages
4wS (four wHeel SteerinG MiXinG)
The Four Wheel Steering Mixing function allows you to use Auxiliary 2 Channel 4 as a second steering channel, allowing
you to use two separate steering servos for Front and Rear steering. The Four Wheel Steering Mixing function allows you
to control either the Front or Rear steering independently, or Mix the Front and Rear steering to have Parallel Four Wheel
Choosing the Four Wheel Steering Function
1) From the TOP screen, press the ENTER key to open the Programming Menu list.
2) Scroll UP or DOWN to highlight the SYSTEM menu, then press the ENTER key.
Scroll DOWN to highlight the AUX TYPE menu, then press the ENTER key.
Choosing Four Wheel Steering Mixing Options
1) From the TOP screen, press the ENTER key to open the Programming Menu list.
2) Scroll UP or DOWN to highlight the AUX2 menu, then press the ENTER key. The
3) Scroll UP or DOWN to move the brackets to the Four Wheel Steering option you
would like to use, then press the ENTER key to highlight that option. The high-
PRO TIP: Use the Servo Monitor at the bottom of the AUX 2 4WS menu to see your programming changes in virtual real
Use the Rotary Dial or one of the four Trim Switches to cycle through the different Four Wheel Steering options
while you're driving. The Four Wheel Steering Mixing function can be toggled OFF and ON while you're driving