User's Manual Part 2

43
T R
MT-4S 2.4GHZ FH4T RADIO SYSTEM USER'S GUIDE
[[ProGraMMinG MenuS
[laP (laP tiMer)
The Lap Timer function allows you to measure and record times for up to 99 laps. The number of laps completed is dis-
played in the Timer menu, and when a lap is completed, the lap time is displayed momentarily on the TOP screen. An
Alarm (Goal Time) is featured that will sound when you reach your Goal Time and, if desired, the Interval Timer (Target
Setting the Interval Timer (Target Time)
1) From within the TIMER menu, scroll DOWN to highlight [INT] : --.
2) Press the ENTER key, then scroll UP or DOWN to set the desired Interval Timer
12.tiMer (traCk tiMerS), Continued....
TIMER INT setting range is -- : -- . -- to 99 : 59 : 99. The default setting is -- : -- . -- (OFF). When the Lap Timer is counting
up, an audible double-tone will sound each time the Lap Timer reaches the Interval Timer value. For example, if you
set the Interval Timer for 30 Seconds, an audible double-tone will sound every 30 seconds.
Setting the Alarm (Goal Time)
1) From within the TIMER menu, scroll DOWN to highlight [ALRM] 05.
2) Press the ENTER key, then scroll UP or DOWN to set the desired Alarm Minutes
value.
3) To set the Alarm Seconds value, press the ENTER key, then scroll DOWN to high-
TIMER ALRM setting range is 00:00 to 99:59. The default setting is 5:00 minutes. An audible tone will sound in 1 sec-
ond intervals 5 seconds before reaching the Goal Time. When the Goal Time is reached, a long audible tone will sound.
3) To set the Interval Timer Seconds value, press the ENTER key, then scroll DOWN
to highlight --. Press the ENTER key a second time, then scroll UP and DOWN to
set the desired Interval Timer Seconds value.
4) To set the Interval Timer 1/100th Seconds value, press the ENTER key, then scroll
DOWN to highlight --. Press the ENTER key a second time, then scroll UP and
Starting the Lap Timer
1) In the default configuration, Push-Button Switch Sw2 controls the Lap Timer. Press and HOLD the Push-Button Switch
for 3 seconds. An audible double-tone will sound and LAP will flash on the TOP screen indicating the Lap Timer is in
Stand-by. To start the Lap Timer, press the Push-Button Switch a second time or pull the Throttle Trigger. An audible
double-tone will sound and the Lap Timer will start counting up. Pressing the Push-Button Switch a second time will
store the first Lap Time, then begin counting a second Lap Time. Each time you press the Push-Button Switch, an
audible tone sounds, the previous Lap Time is stored, a new Lap Time begins and the current Lap Time is displayed
momentarily on the TOP screen. If desired, the Timer Function can be assigned to Push-Button Switch Sw1. For more
Stopping the Lap Timer
1) To stop the Lap Timer, press and HOLD the Push-Button Switch for 3 seconds. An audible double-tone will sound
The Cumulative Time cannot be manually cleared. It will be automatically cleared when the Lap Timer is put in