User's Manual Part 2

T R

MT-4S 2.4GHZ FH4T RADIO SYSTEM USER'S GUIDE

[[ProGraMMinG MenuS

down (Countdown tiMer)

The Countdown Timer function can be used to notify you of your model’s running time. For example, you can set the

Countdown Timer to alert you when it's time to refuel. When the Countdown Timer expires, a long audible tone will

12.tiMer (traCk tiMerS), Continued....

Setting the Alarm

1) From within the TIMER menu, scroll DOWN to highlight [ALRM] 05.

2) Press the ENTER key, then scroll UP or DOWN to set the desired Alarm Minutes

value.

3) To set the Alarm Seconds value, press the ENTER key, then scroll DOWN to high-

TIMER ALRM setting range is 00:00 to 99:59. The default setting is 5:00 minutes. An audible tone will sound in 1 second inter-

vals 5 seconds before reaching the Countdown Alarm Time. When the Countdown Alarm Time is reached, a long audible

Starting the Countdown Timer

1) In the default configuration, Push-Button Switch Sw2 controls the Countdown Timer. Press and HOLD the Push-

Button Switch for 3 seconds. An audible double-tone will sound and DWN will flash on the TOP screen indicating the

Countdown Timer is in Stand-by. To start the Countdown Timer, press the Push-Button Switch a second time or pull

the Throttle Trigger. An audible double-tone will sound and the Countdown Timer will start counting down. An audible

tone will sound in 1 second intervals 5 seconds before reaching zero. When zero is reached, a long audible tone will

sound and the Countdown Timer will begin counting Up. You can manually stop the Countdown Timer at any time by

pressing the Push-Button Switch. Press the Push-Button Switch again will start the Countdown Timer from where it

Stopping the Countdown Timer

1) To stop the Countdown Timer, press and HOLD the Push-Button Switch for 3 seconds. An audible double-tone will

sound indicating the Countdown Timer is stopped and either the remaining Countdown Time or elapsed Count Up

The remaining Countdown Time or Count Up Time cannot be manually cleared. It will be automatically cleared

The Lap Times menu displays a total of up to 99 laps that are recorded using the Lap Timer function. Each Lap Time is

13.laP (laP tiMeS)

Viewing Lap Times

1) From the TOP screen, press the ENTER key to open the Programming Menu list.

2) Scroll UP or DOWN to highlight the LAP menu, then press the ENTER key. The LAP

3) Scroll UP and DOWN to view the stored Lap Times. Lap Times are stored from

the time you start the Lap Timer to the time you Stop the Lap Timer. The Total

Lap Times are stored until you restart the Lap Timer function. When the Lap