User's Manual Part 2

T R

MT-4S 2.4GHZ FH4T RADIO SYSTEM USER'S GUIDE

SySteM MenuS

Changing the Push-Button Switch Function

1) From within the SYSTEM menu, scroll UP or DOWN to highlight the KEY ASSIGN

2) Press the ENTER key to open the KEY ASSIGN menu. SWITCH will be highlighted.

3) Press the ENTER key. The SWITCH menu will be displayed and SW1 : LOGGER

4) Scroll UP or DOWN to highlight the function you would like to change for either

SW1 or SW2.

5) Press the ENTER key, then scroll UP or DOWN to choose the desired function for

either SW1 or SW2. A list of functions that can be assigned to the Push-Button

SwitCH (PuSH-button SwitCH key aSSiGnMentS), Continued....

Changing the Switch Mode

Some functions allow you to change how the Push-Button Switch operates. The following Switch Modes are available:

TOGGLE - When selected, press the Push-Button Switch to turn the function ON and press the Push-Button Switch

a second time to turn the function OFF. See note at the bottom of the previous page.

PUSH - When selected, press and HOLD the Push-Button Switch to turn the function ON. When the Push-Button

1) From within the KEY ASSIGN SWITCH menu, scroll DOWN to highlight the MODE

you would like to change for either SW1 or SW2.

2) Press the ENTER key, then scroll UP or DOWN to choose the desired Switch

The Switch Mode cannot be changed for all functions. When [MODE] ------,

triM, dial and lever (triM, dial and lever key aSSiGnMentS)

The Key Assignments function allows you to assign different functions to Trim Switches Trm1, Trm2, Trm3 and Trm4, the

Rotary Dial and the Auxiliary Lever. This allows you to use the Trim Switches, Rotary Dial and Auxiliary Lever to control

those functions while you're driving. In addition, the Direction of Travel (REV) and the Trim Resolution (Step value) of

OFF

TRIM-ST

I n h i b i t e d

T r i m - S t e e r i n g Trm1

------

NOR