User's Manual Part 2

58
MT-4S 2.4GHZ FH4T RADIO SYSTEM USER'S GUIDE
T R
SySteM MenuS
Changing the Rotary Dial Direction of Travel
The direction that the Rotary Dial moves the servo can be changed from Normal to Reverse. In Normal mode, the Rotary
Dial will move the servo toward the High Side when the Rotary Dial is turned clockwise. In Reverse mode, the Rotary Dial
1) From within the DIAL menu, scroll UP or DOWN to highlight REV NOR.
2) Press the ENTER key, then scroll UP or DOWN to choose the desired REV value
DIAL REV setting range is NOR and REV. The default setting is NOR.
triM, dial and lever (triM, dial and lever key aSSiGnMentS) Continued....
Changing the Auxiliary Lever Function
In general, the Auxiliary Lever is used to control Auxiliary 1 Channel 3 or Auxiliary 2 Channel 4. Adjusting the High and Low
Tweak values determines how far and in which direction the Auxiliary servo travels when the Auxiliary Lever is moved Up
and Down. For example, if you assign AUX2 to the Auxiliary Lever and adjust the Tweak values to +50 and -50, the Auxiliary
2 servo will be centered when the Auxiliary Lever is centered and will travel 50% in one direction when the Auxiliary Lever
is moved Up and travel 50% in the other direction when the Auxiliary Lever is moved Down. This allows you to use the
Auxiliary Lever like a 2- or 3-position switch.
In addition, the Auxiliary Lever can be used to control the same parameter functions as the Trim Switches and the Rotary
Dial. For example, if you assign TRIM-ST and adjust the Tweak values to +100 and -100, the Auxiliary Lever will control
Steering channel Trim. The direction and amount the Trim moves when you move the Auxiliary Lever Up or Down is
To control either the Auxiliary 1 or the Auxiliary 2 servos using the Auxiliary Lever, the Auxiliary Type in the AUX TYPE
1) From within the KEY ASSIGN menu, scroll UP or DOWN to highlight LEVER.
2) Press the ENTER key. The LEVER menu will be displayed and FUNCTION AUX2
3) Press the ENTER key, then scroll UP or DOWN to choose the desired function for
the Auxiliary Lever. A list of functions that can be assigned to the Auxiliary Lever is
When you use the Auxiliary Lever to control a function, such as Steering Dual
Rate or Exponential, the change in values will not be displayed on the TOP
screen like they are when you use the Trim Switches or the Rotary Dial to make the