User's Manual Part 2

63
T R
MT-4S 2.4GHZ FH4T RADIO SYSTEM USER'S GUIDE
SySteM MenuS
2) Press the ENTER key. The BATTERY menu will be displayed and ALERT VOLT 4.6v
will be highlighted.
3) Press the ENTER key, then scroll UP or DOWN to choose the desired Low Voltage
Alert alarm value. Increasing the Low Voltage Alert alarm value will cause the Low
Voltage Alert alarm to sound at a higher voltage and decreasing the Low Voltage
BATTERY ALERT VOLT setting range is 4.1v to 9.0v. The default setting is 4.6v.
Changing the Low Voltage Alert Alarm Value, Continued....
1) From within the BATTERY menu, scroll DOWN to highlight LIMIT VOLT 4.4v.
2) Press the ENTER key, then scroll UP or DOWN to choose the desired Low Voltage
Limit alarm value. Increasing the Low Voltage Limit alarm value will cause the
Low Voltage Limit alarm to sound at a higher voltage and decreasing the Low
Changing the Low Voltage Limit Alarm Value
The Low Voltage Limit alarm will sound to indicate the transmitter batteries are dangerously low and should be re-
placed or recharged right away. The Low Voltage Limit alarm cannot be cancelled. When the Low Voltage Limit alarm
BATTERY LIMIT VOLT setting range is 4.0v to 4.9v. The default setting is 4.4v.
WARNING: Continuing to use the transmitter after the Low Voltage Limit alarm sounds can result in loss of control of
your model. When the Low Voltage Alert alarm sounds, stop use as soon as is safe, then replace or recharge the trans-
9.lCd (lCd ContraSt)
The LCD Contrast function allows you to change the contrast of the Multi-Function LCD to make it easier to read in all
types of lighting conditions. In general, increasing the Contrast will make the Multi-Function LCD easier to read in bright
Changing the Contrast Value