User's Manual Part 2

T R

MT-4S 2.4GHZ FH4T RADIO SYSTEM USER'S GUIDE

SySteM MenuS

1) From within the TEMP1 or TEMP2 menu, scroll UP or DOWN to highlight MAX

TEMP 248ºF (or 120ºC).

2) Press the ENTER key, then scroll UP or DOWN to change the Maximum Tem-

perature value. The Temperature Display Monitor on the Telemetry Screen will

Changing the Maximum Temperature Value

The Maximum Temperature value determines the maximum temperature shown on

the [TEMP1] or [TEMP2] Telemetry Screen Temperature Display Monitors. This allows

you to calibrate each Temperature Display Monitor to match what the Tempera-

TELEMETRY MAX TEMP setting range is 68ºF to 302ºF (0ºC to 150ºC). The default setting is 248ºF (120ºC).

The Maximum Temperature value cannot be set lower than the Alert Temperature value or the Minimum Tempera-

1) From within the TEMP1 or TEMP2 menu, scroll UP or DOWN to highlight ALERT

TEMP 212ºF (or 100ºC).

2) Press the ENTER key, then scroll UP or DOWN to change the Alert Temperature

value. The Alert Temperature value is the temperature that the Temperature

Changing the Alert Temperature Value

The Alert Temperature value determines the temperature at which the Temperature Alert alarm will sound. For example,

you can set an Alert Temperature value for your Nitro engine that will alert you when your engine's cylinder head tem-

perature is getting too hot. When the Alert Temperature value is reached, the Temperature Alert alarm will sound and

LED2 (Red) will flash. The Temperature Alert alarm will sound for approximately 5 seconds, however, LED2 will con-

tinue to flash until the temperature drops below the Alert Temperature value. The audible portion of the Temperature

TELEMETRY ALERT TEMP setting range is 68ºF to 302ºF (0ºC to 150ºC). The default setting is 212ºF (100ºC).

The Alert Temperature value cannot be set higher than the Maximum Temperature value. In addition, the Alert

Temperature value cannot be set lower than the Minimum Temperature value. In some cases, you may need to

Changing the Minimum Temperature Value

The Minimum Temperature value determines the Minimum temperature shown on

the [TEMP1] or [TEMP2] Telemetry Screen Temperature Display Monitors. This al-

lows you to calibrate each Temperature Display Monitor to match what the Tem-

teMP1 and teMP2 SettinG (teMPerature teleMetry diSPlay oPtionS), Continued....