User's Manual Part 2

76
MT-4S 2.4GHZ FH4T RADIO SYSTEM USER'S GUIDE
T R
Temperature Alert Alarm: The Temperature Alert alarm will sound when the TEMP1 and/or TEMP2 temperature reaches
the Alert Temperature value programmed in the SYSTEM - TELEMETRY menu. To clear this alarm, press the Back/Cancel
key or the Push-Button Rotary Dial.
Temperature Display Monitor: Displays the current TEMP1 and TEMP2 temperatures in bar graph format on the Telem-
etry Screen.
Throttle Mode Indicator: Indicates the current Throttle Mode type on the TOP screen.
Throttle Offset: Allows you to shift the Neutral position of the throttle servo, either toward the High Side or the Brake Side.
When used in conjunction with a Push-Button Switch, this function can be used several different ways. For example, if
you're driving a glow- or gas-powered model, you can program the Throttle Offset function to shut down your engine with
the press of a button. In addition, you can program the Throttle Offset function to increase to a steady idle while you're
refueling during a race.
Throttle Offset Indicator: Indicates that the Throttle Offset function is programmed. The Throttle Offset Indicator will only
be displayed if a Throttle Offset percentage value is programmed.
Throttle Program Indicator: Indicates up to four different programming options that are currently programmed to the
Throttle channel. The Throttle Program Indicator will only be displayed if a Throttle channel Programming Value is pro-
grammed.
Throttle Trigger: Controls the speed of the model, both forward and backward, or the model's brake. The Throttle Trigger
position, angle and spring tension can all be adjusted.
Throttle Trigger Position Adjustment Indicator: Indicates the current position of the Throttle Trigger. As the throttle
trigger position is adjusted forward or backward, the Throttle Trigger Position Adjustment Indicator will move forward or
backward.
Throttle Trigger Position Adjustment Screw: Used to adjust the position of the Throttle Trigger either forward or back-
ward.
Throttle Trigger Tension Adjustment Screw: Used to adjust the spring tension of the throttle trigger to best suit the feel
of the user. Turning the Throttle Trigger Tension Adjustment Screw clockwise increases throttle trigger tension and turn-
ing the Throttle Trigger Tension Adjustment Screw counter-clockwise decreases throttle trigger tension.
Throttle Trim Display: Displays the current position of the Throttle Trim Switch on the TOP screen.
Timer Display: Displays the time of the currently selected Timer on the TOP screen.
Timer Type Indicator: Indicates the current Timer Type selected, either LAP or INT (Interval) on the TOP screen.
Trim Switch: The transmitter features four separate Trim Switches positioned around the steering wheel (Trm1, Trm2,
Trm3 and Trm4). Each Trim Switch is programmable and will perform a different function depending on what function is
assigned to it. For example, Trm1 and Trm2 can be used to adjust steering and throttle Trim and Trm4 and Trm5 can be
used to adjust Dual Rate and steering EPA.
Trim Step Resolution: Used to adjust how far the servos travel when the Trim Switches are pressed. You can increase
the resolution, so that the servos travel less when you press the Trim Switches. This makes it possible to fine-tune the set-
tings extremely accurately. In addition, you could decrease the resolution, so that the servos travel more when you press
the Trim Switches. This setting may not be as accurate, although you can set large amounts of Trim faster.
Variable Rate Adjustment: The Variable Rate Adjustment function allows you to recalibrate the operation of the Steering,
Throttle and Auxiliary Lever End Points and Neutral positions to ensure precise control operation.
Voltage Alert Alarm: The Voltage Alert alarm will sound when the receiver battery in your model reaches the Alert Volt-
age value you've programmed in the SYSTEM - TELEMETRY menu. To clear this alarm, press the Back/Cancel key or the
Push-Button Rotary Dial.
Voltage Alert Indicator: Indicates the currently programmed Voltage value on the Telemetry Screen that the receiver
Voltage Alert alarm will sound at.
Voltage Display Monitor: Displays the current receiver battery voltage on the Telemetry Screen in bar graph format.
referenCe
GloSSary of terMS, Continued....