User's Manual Part 1

2120
RDS8000AEROFEATURES
FEA TURES
STW
(Stopwatch)
REV(Reverse)
D/R(DualRate)
CNT(Center)
TRM(Trim)
EXP(Exponential)
EP A(EndPointAdjustment)
M-SL(ModelSelect)
TYP(TypeofModel)
INT(IntegralTimer)
RST(Reset)
CLK(Click)
NAM(Name)
SW-R(SwitchReverse)
CPY(Copy)
FLAPE(Flaperons)
DELTA (Elevons)
V-TAIL(RudderandElevator)
D/R-A(DualRateAlarm)
DESCRIPTION
Usedasastopwatchorto
countdowntoapresettime.
Reversestheservooperating
direction.
Adjustsservothrow .Availableon
ElevandAil.
Changesservoneutralposition.
TheLCDprovidesanindicatorof
thevalue,aswellasthedirection
ofthetrim.
Changesthelinearmovementof
theservototherelationofthe
stickmovement.Canbeset
PositiveorNegative.
Limitsthetotalmovementofa
servoineachdirection.
Selectmodels1to10.
ModelTypeAircraftorHelicopter.
Usedtoshowhowlongthe
transmitterhasbeeninuse.Can
beresettozero.
Clearsallsetupdatainanymodel
tofactorydefaultsettings.
Abeepsoundcanbeheardevery
timeyoupressatransmitterkey.
OptionsActiveorInoperative.
Youcanuseupto3charactersto
nameyourmodel.
Youcanreversethedefault
directionofallcontrolswitches.
Copyonemodeltoanother.
Activates2channelstobeused
forAilerons.
Aileronsoperateasaileronsand
aswellasElevators.Usedfor
flyingwings.
UsedforV-Tailmodels.
AlertsyouwhenaDualRate
switchison.OptionsOnorOff.
T-CUT
(ThrottleCut)
C-MIX(CompensationMixing)
E>F(ElevatortoFlapMixing)
R>A(RuddertoAileronMixing)
R>E(RudertoElevatorMixing)
F>E(FlaptoElevatorMixing)
SPOIR(Spoilerons)
AI-DIF(AileronDifferential)
L-DIF(LandingDifferential)
CR:LA(CrowLeftAileron)
CR:RA(CrowRightAileron)
OPT(OptionMenu)
Step(TrimStep)
BASIC(ON/OFF)
D-EL(DUALELEV ATOR)
Youcansetthepointwherethe
throttlecanbecutusingthe
throttlecut-offbutton.
Abilitytomixamasterchannel
toanotherslavechannelwitha
C-MixSwitch.
AbilitytomixElevatortoFlap.
AbilitytomixRuddertoAilerons.
AbilitytomixRudertoElevator .
AbilitytomixFlaptoElevator .
Forsailplanes.Bothaileronswill
actasspoilersasthethrottle
stickisused.
Changesthetotalamountof
throwupanddowntoboth
aileronservosindependentlyto
helpstopanyadverseyaw.
AllowsAileroncontroltoremain
effectivewhenCroworSpoilers
areused(Sailplane).
Crowisusedtoslowthe
sailplanedown.Aileronsgoup
whenflapsgodown.Leftand
RightAileronsareadjustable.
Advancedprogramallowsyou
toturnofforonfunctiondisplays.
Setstheamountofmovementa
servowillmovewithonebeepof
thetrim.
TurnBasicmenuonoroff.
Activates2channelstobeused
fordualelevatorservos.
Ch1leftservo
Ch7Rightservo
FEA TURES DESCRIPTION
RDS8000HELIFEATURES
FEA TURES
STW(Stopwatch)
REV(Reverse)
D/R(DualRate)
CNT(Center)
TRM(Trim)
EXP(Exponential)
EPA(EndPointAdjustment)
M-SL(ModelSelect)
TYP(TypeofModel)
INT(IntegralTimer)
RST(Reset)
CLK(Click)
NAM(Name)
SW-R(SwitchReverse)
CPY(Copy)
T-CUT(ThrottleCut)
DTM(DynamicTrimMemory)
GYR(Gyro)
CV-P#(ThrottleCurve)
CV-P#(PitchCurve)
RV(RevolutionMixing)
C-MIX(CompensationMixing)
STEP(TrimStep)
SWH(CyclicType)
BASIC(ON/OFF)
OPT(OptionMenu)
DESCRIPTION
Usedasastopwatchortocountdowntoapresettime.
Reversestheservooperatingdirection.
Adjustsservothrow.OnElev ,Ailand(RudinHELIMode)
Changesservoneutralposition.
TheLCDprovidesanindicatorofthevalue,aswellasthedirectionofthetrim.
Changesthelinearmovementoftheservototherelationofthestickmovement.Can
besetPositiveorNegative.
Limitsthetotalmovementofaservoineachdirection.
Selectmodels1to10.
ModelTypeAircraftorHelicopter.
Usedtoshowhowlongthetransmitterhasbeeninuse.Canberesettozero.
Clearsallsetupdatainanymodeltofactorydefaultsettings.
Abeepsoundcanbeheardeverytimeyoupressatransmitterkey.OptionsActiveor
Inoperative.
Youcanuseupto3characterstonameyourmodel.
Youcanreversethedefaultdirectionofallcontrolswitches.
Copyonemodeltoanother.
Youcansetthepointwherethethrottlecanbecutusingthethrottlecutoffbutton.
Memorizestrimsineachflightmode.
Gyrosensitivityforeachflightmode.
Tosetupacurveinallflightmodes.
Tosetupacurveinallflightmodes.
Tailrotoroffsetmixing.
AbilitytomixamasterchanneltoanotherslavechannelwithaC-MIXswitch.
Setstheamountofmovementaservowillmovewithonebeepofthetrim.
5CyclicOptions(Normal,CP3F,CP3B,CP4F,CP4B).
BasicmenuONorOff.
Advancedprogramallowsyoutoturnofforonfunctiondisplays.
Usedtoprovideaswitchablehighandlowservothrow.Thiscanbeusedtoprovide
moresurfacemovementfor3Daerobatics,andloweramountforprecisionflight,for
example.