Installation Instructions

16
How to Use Each Feature
●
Direct Model Select
1) Turn on the power switch with holding the Back button.
2
)
Selecting Model
Select a Model you wish to call with Multi-Selector.
○
Selection range: M01
～
M20
3
)
Move the cursor to the Model and choose model by
enter operation.
A message is displayed on the screen. Select a Model
following the display.
ENTER BACK
RF Mode display
<1>Model Selection Screen
<2>Confirmation Screen
Model to be
changed to is
displayed
No
→
Back to <1>.
Yes
→
Change model and move to the top.
⇒
Holding
Holding
Push
Power Switch ON
●
MT-5 has a feature of Short Cut Menu that is launched as the user performs key operation when operating
the power switch.
When you turn the power switch on with holding on the Back Button, it becomes the Direct Model Select.
When you turn the power switch on with holding on Enter operation, the Quick Setup feature launches.
Direct Model Select is a feature for quickly selecting a model to run and Quick Setup is a feature for
various setup with easy operation when setting up a new RC car.
●
Quick Setup feature is set in the following order using the Enter operation after launching.
Selecting Model
→
Selecting Type
→
Initializing Model
→
Selecting RF Modes
→
Selecting Response
Mode
→
BIND
→
Setting Base
ABOUT SHORT CUT MENU
DIRECT MODEL SELECT <DIRECT MODEL>