Installation Instructions

20
How to Use Each Feature
●
Features to control the speed of the servos used for steering and throttle. By setting, the RC car is not
affected even when doing a sudden operation. On the steering side, smooth corner work becomes
possible and on the throttle side, stable rising from a corner by throttle work with saved power.
*When setting AUX TYPE to [CODE5/CODE10], adjusting the speed feature of the AUX channel does not
affect the performance.
*When setting the speed of the AUX channel, do so using steering/throttle as a reference.
●
A feature to delay the speed of the steering servos against the steering operation. You can set speed for steering
forward and returning individually. For steering operation slower than setting, the speed feature does not work.
1
)
[ST (Steering)] with Select key.
2
)
Setting on the forward side [FORWARD]
Select [FORWARD] with the Enter key and adjust
the setting value by multi-selector.
*When cancelling a selected feature, use the Back key.

○
Setting Range: 0
～
-100
○
Default: 0
3
)
Setting on the Return side [RETURN]
Select [RETURN] with the Enter key and adjust
the setting value with by multi-selector.
○
Setting Range: 0
～
-100
○
Default: 0


*Adjust during actual operation. When not using the features or when a setting value cannot be determined
even after adjustment, set the value to 0% (linear).
●
A feature to slow down the performance speed of the throttle servos and delay the response of the speed
controller against throttle operation. You can set speed for entering throttle (Forward) and returning
(Return) individually. The speed feature does not work with throttle operation slower than the setting.
*Setting is only for High side and Brake side cannot be set.
1
)
Select [TH (Throttle)] with Select key.
2
)
Setting on the forward side [FORWARD]
Select [FORWARD] with the Enter key and adjust
the setting value by multi-selector.
*When cancelling a selected feature, use the Back key.

○
Setting Range: 0
～
-100
○
Default: 0
3
)
Setting on the Return side (RETURN)
Select [RETURN] with the Enter key and adjust the setting
value by multi-selector.

○
Setting Range: 0
～
-100
○
Default: 0
*Adjust during actual operation. When not using the features or when a setting value cannot be determined
even after adjustment, set the value to 0% (linear).
Choose
[
ST
]
by select button
• For driving an RC car, steering operation that suits the movement of the RC car is important and
excessive operation is not recommended. Steering speed can minimize unnecessary operation
and enables smooth cornering.
• When steering speed and steering curve are combined, the effect is doubled.
SUPPLEMENT
• For driving an RC car, throttle operation that suits the movement of the RC car is important
and excessive operation is not recommended. Throttle speed can minimize unnecessary
operation and enables smooth performance.
• When throttle speed and throttle curve are combined, the effect is doubled.
SUPPLEMENT
Neutral
End
Ｎ
FORWARD
RETURN
Ｈ
Choose [TH] by select button
SPEED
SETTING
STEERING SPEED
[
ST
]
THROTTLE SPEED
[
TH
]