Installation Instructions

21
How to Use Each Feature
How to Use Each Feature
Normal
Quick Quick
Normal
Mild Mild
Servo Operating Amount Servo Operating Amount
Neutral Position
Steering Wheel L End Operating Amount
Throttle Trigger H End Operating Amount
Steering Wheel R End Operating Amount
Throttle Trigger B End Operating Amount
Quick Quick
Normal Normal
Mild Mild
Servo Operating Amount Servo Operating Amount
Neutral Position
Steering Wheel L End Operating Amount
Throttle Trigger H End Operating Amount
Steering Wheel R End Operating Amount
Throttle Trigger B End Operating Amount
●
Steering characteristics can vary from Mild to Linear and to Quick.
Generally, when the RC car senses the over-steer, the setting value is set to minus side,
and when the RC car senses the under-steer, the numerical value is set to plus.
Steering exponential will do the L/R concurrent setting.
1) Select ST with the Select button and set CURVE TYPE of ST to [EXP] with the multi-selector.
2) Adjust the setting value with the multi-selector.

○
Setting Range: -100
～
100%
○
Default: 0%
*When cancelling a selected feature, use the Back button.
Steering Operation Position
CURVE
SETTING
●
Function of making operation volume of servo variable with respect to the operation of the steering
wheel, throttle trigger, AUX. It responds quickly when the set value is on plus (+) side whereas it responds
mildly when the set value is on minus (-) side.
●
Exponential (EXP) of curve operation and adjustable rate controller (ARC) of linear position can be
selected.
*
If the AUX type is set to [CODE], adjustment of the curve feature of the AUX channel does not a󰀨ect the
performance.
*
In case of adjustment of curve setting of the AUX channel, use the steering/ throttle as a reference.
Exponential (EXP)
Adjustable rate controller (ARC)
Position at which operation is variable can be changed by adjusting the setting of POINT.
STEERING EXPONENTIAL
[
ST
]