Installation Instructions

24
How to Use Each Feature
●
You can change the AUX1 performance feature from Mild to Linear and to Quick. You can set the High side
and the Low side separately.
*When setting AUX1 to [CODE5/CODE10] in AUX TYPE, changing the setting does not affect the
performance.
1) Select AUX1 with the Select button and set
CURVE TYPE of AUX1 to [ARC] with the multi-selector.
2) Setting Rate [RATE]
Select [RATE] with the multi-selector
and adjust the setting value.

○
Setting Range: -100
～
100%
○
Default: 0%
3) Setting Point [POINT]
Select [POINT] with the multi-selector
and adjust the setting value.

○
Setting Range: 1
～
99%
○
Default: 50%
*When cancelling a selected feature, use the Back button.
●
You can change the operation feature of AUX2 from Mild to Linear and to Quick.
You can set the High side and the Low side separately.
*When setting AUX2 to [CODE5/CODE10] in AUX TYPE, changing the setting does not affect the
performance.
1) Select AUX2 with the Select button and set
CURVE TYPE of AUX2 to [ARC] with the multi-selector.
2) Setting Rate [RATE]
Select [RATE] with the multi-selector
and adjust the setting value.

○
Setting Range: -100
～
100%
○
Default: 0%
3) Setting Point [POINT]
Select [POINT] with the multi-selector
and adjust the setting value.

○
Setting Range: 1
～
99%
○
Default: 50%
*When cancelling a selected feature, use the Back button.
Point Setting Position
Point Setting Position
AUX1
・
ADJUSTABLE RATE CONTROL
[
AUX1
]
AUX2
・
ADJUSTABLE RATE CONTROL
[
AUX2
]