Installation Instructions

28
How to Use Each Feature
●
You can use AUX1 for functions of accessories and adjust the maximum steering angle (operating
quantity) with EPA. Since you can set H/L separately, precise adjustment is possible.
*When setting AUX1 to [CODE5/CODE10] in AUX TYPE, the operation will not be refected even by
adjusting EPA.
1) Before adjusting AUX1 End Point Adjustment (AUX1-EPA), make a neutral adjustment of the servo (P. 26).
Neutral adjustment is to align the center position with SubTrim by turning the power on and installing the
servo horn in the approximate center position.
2) Select [AUX1] with the Select button. Select either of [EPA-H/EPA-L] with the multi-selector and determine
with the Enter.
3) Adjust the operating quantity with the multi-selector.

○
Setting Range:H/L 0%
～
150%
○
Default: H/L100%
Choose [AUX1] by select button
●
You can use AUX2 for functions of accessories and adjust the maximum steering angle (operating
quantity) with EPA. Since you can set H/L separately, precise adjustment is possible.
*When setting AUX2 to [CODE5/CODE10] in AUX TYPE, the operation will not be reflected even by
adjusting EPA.
1) Before adjusting AUX2 End Point Adjustment (AUX2-EPA), make a neutral adjustment of the servo (P. 26).
Neutral adjustment is to align the center position with Sub Trim by turning the power on and installing the
servo horn in the approximate center position.
2) Select [AUX2] with the Select button. Select either of [EPA-H/EPA-L] with the multi-selector and determine
with the Enter.
3) Adjust the operating quantity with the multi-selector.

○
Setting Range:H/L 0%
～
150%
○
Default: H/L100%
Choose [AUX2] by select button
AUX1
・
END POINT ADJUSTMENT
[
AUX1-EPA
]
AUX2
・
END POINT ADJUSTMENT
[
AUX2-EPA
]