Installation Instructions

34
How to Use Each Feature
●
With the operation of assigned Trim or Switch, control the motion of the 4 Wheel Steering.
1) Select [AUX] with the multi-selector and define with the Enter operation.
2) Setting Operating Mode
Set the Operating Mode of 4WS with the multi-selector.
Set the Operating Mode according to the usage.
*When using during operation, assign the feature
of the Operating Mode to Trim or the switch
1.
●
By setting Motor On Axle (MOA), you can adjust the drive ratio of front and rear wheels of a front-rear dual
motor car.
1) Select [AUX] with the multi-selector and define with
the Enter operation.
2) Setting Operating Mode
Set the Operating Mode of MOA with the multi-selector.
*Adjust Step setting to change the drive distribution
of front-rear with [MODE] of [AUX TYPE] of [SYSTEM].
*When using, assign the features to Dial or Trim or
operate with the multi-selector.
*Connect the speed controller for controlling the rear motor
to the channel (AUX1/AUX2) that is set to MOA.
ENTER BACK
Servo monitor
Switching the Operation Mode
NOR
REV
R‑ST
F‑ST
Steering the Motion Image
<L Side Operation> <Neutral> <R Side Operation>
<L Side Operation> <Neutral> <R Side Operation>
<L Side Operation> <Neutral> <R Side Operation>
<L Side Operation> <Neutral> <R Side Operation>
ENTER BACK
Servo monitor
Front-rear drive ratio
MOA Motion Image
Front Drive
Rear Drive
Front Drive
Rear Drive
Front Driv
e
Rear Drive
*By changing the ratio, you can adjust the gear ratio of front-rear.
4-WHEEL STEERING
AUX
[
MOA
]
FRONT-REAR WHEEL SEPARATE DRIVE
AUX