Installation Instructions

35
How to Use Each Feature
How to Use Each Feature
●
AUX is a feature to set the performance of AUX1 and AUX2 (3ch, 4ch). You can choose from STEP AUX
(STEP), POINT AUX (POINT), 4WS (4-Wheel Steering: Coordinate Phase, Opposite Phase). MOA (Motor
On Axle), AUX-MIX (AUX Mixing: ST
→
AUX/TH-AUX) and CODE5/CODE10 (Code Communication).
*Setting of AUX TYPE is done in the System Menu. Make a setting according to the purpose of the use.
●
Setting AUX Mixing allows you to mix from the steering to AUX and from the throttle to AUX.
*Set AUX TYPE and MODE for operation to use for [AUX TYPE] of [SYSTEM].
●
At factory, the AUX feature is set to Step AUX.
1) Select [AUX] with the multi-selector and define with the Enter operation.
2) Setting Mixing Rate
Set the Mixing Rate with the multi-selector.

○
Setting Range: 0%
～
100%
○
Default: 100%
*Set to [AUX MIX] with [AUX TYPE] of [SYSTEM] and set
the Mixing performance with [MODE] according to the usage.
(p.52)
*Assign the features of the Mixing Rate to Trim or the switch
with Key Assignments, or operate with the multi-selector.
ENTER BACK
Servo monitor
Setting Mixing Rate
AUX
AUX MIXING
AUX