Installation Instructions

37
How to Use Each Feature
How to Use Each Feature
●
It has three timer features including Lap Timer, Interval Timer and Down Timer.
●
When selecting a timer and operate the Select button, you can toggle between the timer screen and the
setting screen.
*When a timer is activated, X Illumination and Function LED flash.
⇔
ENTER
BACK
Select Button
<LAP TIMER SCREEN> <SETUP SCREEN>
●
You can check the lap time measured on the LAP
TIMER screen.
●
When Enter is being operated while Lap Timer is
activated/not activated, the screen is changed to the
Lap Time display.
You can check each lap time with the multi-selector.
●
Make all settings of the timers with the Setup Menu.
1) Setting TYPE
Select [TYPE] with the multi-selector to do setting.
○
Setting Range: LAP/INT/DOWN
○
Default:LAP
●
LAP: Possible to measure and record each lap up to 999 laps
(for all models)
●
INT: The timer is activated at the set time.
●
DOWN: It can be a guideline for calculating running time
and fuel comsumption of a Nitro car.
2) Setting GOAL TIME
By setting a goal time, the Alarm is activated.
○
Setting Range: 00: 00 ~ 99: 59 (00: 01 unit)
○
Default: 05: 00
3) Setting INTERVAL
The Alarm is activated at the set time (It tells you the lap time).
○
Setting Range: 00: 00 ~ 99: 59 (00: 01 unit)
○
Default: 01: 00
4) Setting LAP NAVI
It activates the alarm at the set time at the time of running
and uses it as a guideline for the goal time.
○
Setting Range: 00:00.01s
～
99:59.99
○
Default: --:--.--
*LAP NAVI will not start at 00 : 00. 00.
⇒
ENTER BACK
Select Button
TIMER
SETUP
TIMER