Installation Instructions

47
How to Use Each Feature
How to Use Each Feature
●
You can set the features about Model Select, Model Name, Model Copy and Model Clear.
●
Installed with high capacity EEPROM and it can memorize data for 20 models of M01 ~ M20.
●
You can copy a selected model data to another model.
1) Select [MODEL] with the multi-selector and determine
with the Enter operation.
2) Setting Model Copy [MODEL COPY]
Select [MODEL COPY] with the multi-selector and
determine with the Enter operation.
3) Selection of a Copy Destination Model
Select a Copy Destination Model with the multi-
selector.
*You can also select the copy source Model.
*For the copy source Model and the Copy destination
Model, you can also select a micro SD card. When
selecting a micro SD card as a copy source, and
when there is no model data, you cannot copy.
4) When Enter is being operated a message is displayed
on the screen. Follow the display to operate and
complete Model Copy.
●
About the Mode of Model Copy
FULL
All settings in the Model Data will be copied.
SYSTEM
Select the contents of SYSTEM of Model Data.
MODEL
Setting within Model Data, TH Function
Copying only the setting value of AUX
Select a mode of Model Copy for your usage.
ENTER BACK
ENTER
ENTER BACK
Copy Source Model Selecting Copy Mode
Copy Destination Model
Back to 1 after copying
<1>Selecting Copy Destination
<2>Copy Confirmation Screen
<3>Copying
・
NO
→
Back to <1>
・
YES
→
Move to <3>
MODEL MENU
MODEL
MODEL COPY