Installation Instructions

54
How to Use Each Feature
TYPE
STEP
POINT
4WS
MOA
AUX MIX
CODE5
CODE10
MODE
1/2/5/10/20/25/50/100
2/3/4/5/6
2mode/3mode/4mode
1/2/5/10/20/25/50/100
ST-mix/TH-mix
USER/SVZ/SVD
USER/SV-G/D/PGS/SGS-02
ENTER BACK
ENTER BACK
Switching Type Mode Type
F-ST
REV
(Opposite
Phase)
F-ST
REV
NOR
NOR
F-ST
R-ST
REV
2mode 3mode 4mode
(Opposite
Phase)
(Opposite
Phase)
(Coodinated
Phase)
(Coodinated
Phase)
AUX TYPE
●
A feature to set the performance of AUX1 and AUX2 (3ch and
4ch).
1) Select [SYSTEM] with the multi-selector and determine with the
Enter operation.
2) Select [AUX TYPE] with the multi-selector and determine with the
Enter operation.
3) Set AUX TYPE with the multi-selector.
○
Setting Items:
○
Default:AUX1:STEP MODE:5
AUX2:STEP MODE:5
*Action image of 4WS Mode setting
*For ST-mix, mixing is in effect from Steering onto AUX; for TH-mix, from Throttle onto AUX.
*When setting AUX TYPE to CODE, change of setting of the compatible equipment can be done from the
transmitter. Compatible equipment like PGS servo series, SUPER VORTEX Series, and SGS-01C/ SGS-01D/
SGS-02.
*When AUX TYPE is set to CODE, do not connect any equipment that are not compatible to AUX1 and AUX2
(3ch and 4ch) of the receiver. If you connect equipment that is not compatible, the connected equipment will
be failed.
*For POINT AUX, see P. 33, for CODE AUX, see P.36.
*CODE10 is a compatible feature to PGS Servo/SUPER VORTEX Gen2/Gen2 PRO/SV-D2/STOCK/SGS-02.
*When setting MODE to USER with CODE5/CODE10, you can freely register names of each item.