Installation Instructions

57
How to Use Each Feature
How to Use Each Feature
●
You can set LCD (Liquid Crystal) contrast (intensity),
brightness and lighting mode (lighting time) of Back Light.
1) Select [SYSTEM] with the multi-selector and determine with
the Enter operation.
2) Select [LCD] with the multi-selector and determine with the Enter
operation.
3) Set LCD (Liquid Crystal Display) contrast (intensity),
brightness and lighting mode (lighting time) of Back Light.
*In some contrast, you may not see screen display.
○
Setting Items: CONTRAST (Intensity of Display)
BRIGHT (Brightness of Display)
LIGHTS-MODE (Backlight Lighting Mode)
LIGHT-TIME (Backlight Lighting Time)
○
Setting Range:CONTRAST:0
～
30
BRIGHT:0
～
10
LIGHT-MODE:OFF/KEY-ON/ALWAYS
LIGHT-TIME:1
～
30sec
○
Default: CONTRAST:15
BRIGHT:8
LIGHT-MODE:KEY-ON
LIGHT-TIME:10sec
ENTER BACK
●
A feature to adjust the operating mode and brightness of the function LED installed on the transmitter body.
1) Select [SYSTEM] with the multi-selector and determine with the Enter operation.
2) Select [LED] with the multi-selector and determine with
the Enter operation.
3) Set the operating mode and brightness of the Function LED.
○
Setting Items: MODE(Operating Mode)
BRIGHT(Brightness of LED)
○
Setting Range: MODE:ALWAYS/WAVE/OFF
BRIGHT:0
～
10
*BRIGHT is only for setting ALWAYS
○
Default: MODE:WAVE
BRIGHT:10
ENTER BACK
Function LED
Function LED
Function LED
SYSTEM MENU
SYSTEM
LCD
LED