CLT-2422E-NEW 7/5/02 7:31 PM Page 1 2.4 GHz Cordless Telephone with Caller ID CLT-2418 CLT-2422 Instruction Manual Important Charge the handset battery for 12 continuous hours prior to first use. SANYO Canada Inc. www.sanyocanada.
CLT-2422E-NEW 7/5/02 7:31 PM Page 2 TABLE OF CONTENTS TABLE OF CONTENTS INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 GETTING STARTED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Checking package contents Modular jack . . . . . . . . . . . Installation tips . . . . . . . . . Battery setup . . . . . . . . . . . Telephone line connection Mounting on a wall . . . . . Digital Security System . . . . . . . . . . . . . . . . . .
CLT-2422E-NEW 7/5/02 7:31 PM Page 4 INTRODUCTION GETTING STARTED Congratulations on your purchase of this Sanyo cordless telephone. Checking the package contents Your Sanyo 2.4 GHz cordless telephone is a fine-quality home communications product. It is carefully designed and produced by a world leader of consumer and industrial electronics equipment. With proper maintenance and care, it will provide you with years of enjoyment and convenience. Make sure your package includes the items shown here.
CLT-2422E-NEW 7/5/02 7:31 PM Page 6 GETTING STARTED GETTING STARTED Battery setup 1. Remove the battery compartment cover on the handset, insert the battery, plug the cord into the jack (inside the compartment) and replace the cover. 2. Set the handset RINGER switch to ON, and place handset in the base. 3. Plug the AC adpator into the POWER DC 12V jack on the back of base and the other end into an electrical outlet. The CHARGE/PAGE indicator comes on verifying the battery is charging.
CLT-2422E-NEW 7/5/02 7:31 PM Page 8 NAMES AND CONTROLS NAMES AND CONTROLS Base unit Handset PAGE/INTERCOM key Earpiece REDIAL/DEL (delete) key CALL BACK key LCD screen Incoming call visual alert LED VOICE MAIL/ IN USE indicator Speaker CANCEL key VOLUME keys LCD screen 7-10-11/HOLD key CID ▲ or ▼ key 7-10-11 CID DISPLAY key Volume (VOLUME) keys O CID ▲ or ▼ key HOLD key TALK/CALL BACK key (also used to END a call) PAUSE key CANCEL key FLASH/ PROGRAM key RINGER switch REDIAL/DEL (d
CLT-2422E-NEW 7/5/02 7:31 PM Page 10 INITIAL PROGRAMMING INITIAL PROGRAMMING Before using this telephone 6 initial settings must be completed on the base: Language, Screen contrast, Area code (This is required to use Caller ID service from your telephone company), Ringer tone and Time. Note: The Language selection and Ringer tone setting must be done separately for the handset and for the base speakerphone. On the base: 3. 4. 1. 2. 3. 4. Language setting 1. 2.
CLT-2422E-NEW 7/5/02 7:31 PM Page 12 INITIAL PROGRAMMING BASICS Resetting to default You can reset the phone programming to the initial factory default settings. The default settings are: Language - E n g l i s h Contrast - 2 Area Code - _ _ _ Ringer Tone - R i n g e r T o n e 1 Time Set - 1 2 : 0 0 A M Default Set - 2 N O 1. 2. 3. 4. Make sure the phone is OFF. Press FLASH/PROGRAM on the base six times. D E F A U L T S E T T I N G 1 Y E S 2 N O shows on screen.
CLT-2422E-NEW 7/5/02 7:31 PM Page 14 BASICS BASICS Using base speakerphone: Ringer switch and volume 1. 2. Handset ringer: Press SPEAKER. Dial the phone number. The screen shows: The RINGER switch must be on for the handset to ring during incoming calls. Base ringer: Telephone number Call timer 3. Volume level 1. 2. 3. 4. Press SPEAKER again to hang up. Volume adjustment The VOLUME keys on the handset adjusts the volume level of the handset’s earpiece.
CLT-2422E-NEW 7/5/02 7:31 PM Page 16 BASICS BASICS Pre-dialing 1. Make sure the phone is OFF (not in TALK mode). 2. Enter the telephone number. The telephone number shows on screen. 3. Press TALK/CALL BACK on the handset or press SPEAKER or CALL BACK on the base. The telephone number shows on the respective screen. Note: You may enter up to 32 pre-dial digits. Changing the pre-dial number 1. Make sure the phone is OFF (not in TALK mode). 2. Enter the telephone number. 3.
CLT-2422E-NEW 7/5/02 7:31 PM Page 18 BASICS BASICS Using the intercom while you are on a call You may want to use the intercom feature while you are on a call. From the handset (in TALK mode): 1. 2. 3. Press INT on the handset. The line is put on hold, and you will hear a paging tone at the base and handset. Press PAGE/INTERCOM on the base and I N T E R C O M shows in the handset screen. Press INT on the handset to return to TALK mode. Conferencing from the handset: 1. 2. 3. 4.
CLT-2422E-NEW 7/5/02 7:31 PM Page 20 BASICS BASICS Tip: Do not use TALK/CALL BACK (or SPEAKER on base) to activate custom calling services such as Call Waiting, or you will hang up the phone. CHAN (Channel) key While talking, you might need to manually change the channel in order to get rid of static. Press and release the CHAN key on the handset to switch to the next clear channel. HOLD key Press HOLD on the handset or base to put a call on hold.
CLT-2422E-NEW 7/5/02 7:31 PM Page 22 CALLER ID FEATURES CALLER ID FEATURES This phone receives and displays incoming call information transmitted by your local phone company. This information can include the phone number and/or the name, date and time. The phone can store up to 40 calls for later review.
CLT-2422E-NEW 7/5/02 7:31 PM Page 24 CALLER ID FEATURES DIRECTORY Dialing a Caller ID number 1. Make sure the phone is OFF (not in TALK mode). 2. Use CID ▲ or ▼, to scroll to the desired Caller ID entry. 3. Use the 7-10-11 key to show the phone number in proper digits if necessary. 4. Press the TALK/CALL BACK on the handset or CALL BACK on the base. The number dials automatically. Deleting an entry from the Caller ID list Use REDIAL/DEL to erase the entry currently shown on screen or all entries.
CLT-2422E-NEW 7/5/02 7:31 PM Page 26 DIRECTORY DIRECTORY Inserting a pause in the dialing sequence Press PAUSE twice to insert a delay in the dialing sequence of a stored telephone number when a pause is needed to wait for a dial tone (for example after you dial 9 for an outside line, or to wait for a computer access tone). Each pause counts as 1 digit in the dialing sequence. P shows on screen. Note: Make sure to press PAUSE twice to enter a pause.
CLT-2422E-NEW 7/5/02 7:31 PM Page 28 CHANGING THE BATTERY RECYCLING NICKEL-METAL HYDRIDE BATTERIES Battery replacement and handling When the operating time becomes short even after a battery is recharged, please replace the battery. With normal usage, your battery should last about one year. NICKEL-METAL HYDRIDE BATTERIES MUST BE DISPOSED OF PROPERLY. Please take your used battery pack to a store that recycles Ni-MH batteries.
CLT-2422E-NEW 7/5/02 7:31 PM Page 30 LCD SCREEN MESSAGES SOUND SIGNALS The following indicators show the status of a message or of the phone. A long warbling tone Single Tone A key is pressed ERROR Two Long Beeps Confirmation tone One short beep and one long beep Page signal Caller information has been interrupted during transmission or the phone is excessively noisy. ENTER NAME Prompt telling you to enter name in directory.
CLT-2422E-NEW 7/5/02 7:31 PM Page 32 TROUBLESHOOTING TROUBLESHOOTING • Is the battery pack installed correctly? • Did the handset beep when you pressed TALK/CALL BACK? Did the VOICEMAIL/IN USE indicator come on? The battery may need to be charged. Dial tone is OK, but cannot dial out • Make sure the TONE/PULSE switch on the back of the base unit is set to TONE or PULSE according to your phone service. Handset does not ring • Make sure the RINGER switch on the handset is turned to ON.
CLT-2422E-NEW 7/5/02 7:31 PM Page 34 MAXIMIZE BATTERY PERFORMANCE The freedom that your cordless telephone can offer is fully dependent on the performance of the rechargeable battery in the handset. To maximize the battery performance, follow these guidelines: Charge it for a full 12 hours Before initial use of your new battery, charge it for 12 hours continuously. The proper initial charging is very important to maximize the battery performance.
CLT-2422E-NEW 7/5/02 7:31 PM Page 36 WARRANTY TECHNICAL INFORMATION connections themselves, but should contact the appropriate electrical inspection authority, or electrician, as appropriate. In some cases, the company’s inside wiring associated with single-line individual service may be extended by means of a certified connector assembly (telephone extension cord). The customer should be aware that compliance with the above conditions may not prevent degradation of service in some situations.
CLT-2422E-NEW 7/5/02 7:31 PM Page 38 SOS HELP LINE At Sanyo, fulfilling the needs of our customers is a priority. That’s why we created our SOS customer service program that guarantees satisfaction. NATIONWIDE CUSTOMER SUPPORT SOS is there to help you. Our friendly and knowledgeable product specialists will quickly answer your questions about setup and use of Sanyo telephone products.
