Datasheet

9TD type
Centrifugal Fan
■ Reference Dimensions of Mounting Holes and Vent Opening (unit: mm)
Inlet nozzle side
Fan side
120°
ø48±0.5
120°
120°
3-ø3.5
ø77±0.5
4-ø4.5
ø87±0.5
■ Dimensions (unit: mm)
Rotating direction
Airflow direction
Airflow direction
Lead wire
AWG 26
UL 1007
3-M3
ROTATION
MAX.4mm
DEPTH OF SCREWS
+30
300 0
120°±1°
34±1
ø48±0.3
(10)
8.5±0.5
ø56±1 ø70±1
13.7±1
20±1
ø56±1
Fan
Inlet nozzle
(Model: 109-1106)
Material: Steel sheet
Surface treatment:
Electro nickel plating (silver)
Mass: 40 g
O
A
ø87±0.5
90°±1°
(Each)
ø98±1
4-ø4.5±0.5
(R2.8)
(1)
3±1
ø56±0.5
Section AO
■ Reference Diagram for Mounting
Fan
Inlet nozzle
Fan
Inlet nozzle
Finger guard
Bolt length: 4 mm max
(1)
(24)
(3)
CATALOG No. C1098B001 ‘19.10
3-33-1 Minami-Otsuka, Toshima-ku, Tokyo 170-8451, Japan TEL: [phone] https://www.sanyodenki.com
The names of companies and/or their products specified in this catalog are the trade names, and/or trademarks and/or registered trademarks of such respective companies.
“San Ace” is a trademark of SANYO DENKI CO.,LTD.
Specifications are subject to change without notice.
Notice
●Please read the "Safety Precautions" on our website before using the product.
●The products shown in this catalog are subject to Japanese Export Control Law. Diversion contrary to the law of exporting country is prohibited.
●For protecting fan bearings against electrolytic corrosion near strong electromagnetic noise sources,
we provide effective countermeasures such as Electrolytic Corrosion Proof Fans and EMC guards. Contact us for details.
ø
70
×
20
mm
■
Specifications
When the optional inlet nozzle (109-1106) is mounted.
■
Common Specifications
■
Features
The models listed below have pulse sensors with PWM control function.
Model no.
Rated voltage
[V]
Operating
voltage range
[V]
PWM
duty cycle*
[%]
Rated current
[A]
Rated input
[W]
Rated speed
[min
-1
]
Max. airflow
[m
3
/min] [CFM]
Max. static pressure
[Pa] [inchH
2
O]
SPL
[dB(A)]
Operating
temperature
[°C]
Expected
life
[h]
9TD12P6G001 12 10.8 to 13.2
100 1.0 12 9200 1.13 39.9 560 2.24 61
-20 to +70
40000/60°C
(70000/40°C)
20 0.1 1.2 2000 0.23 8.1 25 0.10 30
* PWM frequency: 25 kHz. Fan does not rotate when PWM duty cycle is 0%.
Max input is 12.6 W at rated voltage.
□ Material
Motor case: Aluminum (Black coating), Impeller: Plastic (Flammability: UL 94V-0)
□
Expected life
Refer to specifications
(L10 life: 90% survival rate for continuous operation in free air at 60˚C, rated voltage)
Expected life at 40°C is for reference only.
□
Motor protection system
Current blocking function and reverse polarity protection
□
Dielectric strength
50/60 Hz, 500 VAC, for 1 minute (between lead wire conductors and motor case)
□
Insulation resistance
10 MΩ or more with a 500 VDC megger (between lead wire conductors and motor case)
□
Sound pressure level (SPL)
At 1 m away from the air inlet
□
Operating temperature
Refer to specifications (Non-condensing)
□
Storage temperature
-30 to +70°C (Non-condensing)
□
Lead wire ○＋
Red
○ー
Black Sensor Yellow Control Brown
□
Mass
Approx. 90 g
Compact, Thin Profile
This is the industry's first
*
centrifugal fan with an outer diameter of 70 mm and a
thickness of 20 mm.
It is suitable for mounting on small and thin equipment and integration in board
modules.
High Airflow and High Static Pressure
This fan delivers a maximum airflow of 1.13 m
3
/min and a maximum static pressure
of 560 Pa.
Compared with the current model,
**
the maximum airflow has increased
approximately 3.9 times and maximum static pressure has increased approximately
1.9 times.
High Energy Efficiency and Low Noise
The PWM control function enables the control of fan speed, contributing to
lowering noise and improving energy efficiency of devices.
* Based on our own research as of October 29, 2019, among equally-sized industrial centrifugal fans on
the market.
** Current model: San Ace B76 9BD type 76 × 20 mm Blower (9BD12SC6-1).