User Manual

10
Connection of the power cable (3)
7) Feazings processing of the core line.
\ Pressing the black portion of the connector
with a minus screwdriver(φ6) or a plus
screwdriver(φ4) , insert a core wire.
\ L (Loading), N (Neutral), FG (Frame Ground).
8) Combine the copper shield to the position
“FIX” of Photo 5. And tighten the cable
gland firmly.
\ [Caution]If the fixation of the terminal
block’s lid is imperfect, it is feared that this
CS gives hindrance to other electric devices.
N:White
FG:Red
L:Black
F
o
r
m
i
n
g
(photo5)
9) Form core wires that are inserted into the power supply terminal.
10) The tightening of the dome nut must be done by hand without fail and
tighten it strongly.
11) Wind the self-bonding tape between the surface of dome nut and the end of
cable.
Fix
Press with a screwdriver