User Manual

11
Connection of the line cable (1)
1) Reeve the cable from the dome nut into
the lid.
2) Pull the line cable out to enough length
that the tip of the cable can be
processed.
3) Peeling off the line cable covering.
(Photo 6)
\ Peel off the covering of the line cable. The
length of the line cable is 100 - 120 mm.
(Photo 6)
4) Loosen the shield and wind it on the
heart line of covering 4 turns or more.
(Photo 7)
(photo6)
(photo7)
Shield tape
Drain wire
Covering
130 - 140mm
Wind the aluminum shield, and
furthermore wind drain wire here too.
Process the end of the line wire, which are
not used, with the suiting tape.