User's Manual

38
Select 'LJLWDO]RRP. The On-Screen Menu disappears and
']RRP appears. Press the SELECT button to expand the
image size. Use the Point
ŸźŻŹ buttons to pan the image.
The Panning function can work only when the image is larger
than the screen size.
A projected image can be also expanded by pressing the
D.ZOOM
Ÿ or the SELECT button on the remote control.
To exit the Digital zoom +/– mode, press any button except
the D.ZOOM
Ÿź and the SELECT buttons.
'LJLWDO]RRP
Select Digital zoom -. The On-Screen Menu disappears
and D. zoom - appears. Press the SELECT button to
compress image size.
The projected image can be also compressed by pressing
the D.ZOOM
ź or the SELECT button on the remote control.
Digital zoom -
To return to the previous screen size, select a screen size
from the Screen Size Adjustment Menu or select an input
source from the Input Source Selection Menu (see pages
29-30) again, or adjust the screen size with the D.ZOOM
Ÿźbuttons.
For zooming in and out the images
3Note:
• The panning function may not operate
properly if the stored Mode in the PC
adjust Menu is used (p.34).
• The minimum compression ratio is limited
depending on the input signal, when the
Keystone function is working or when
Custom is selected for the screen size.
•True, Full, and 'LJLWDO]RRP± cannot
be selected when 480i, 575i, 480p,or
575p is selected in the PC System Menu
(p.31).
• 'LJLWDO]RRP cannot be selected
when Full or True is selected.
Remote Control
D.ZOOM Ÿ button
POINT buttons
SELECT button
D.ZOOM ź button
Adjust the screen scale and position manually with this
function.
Press the Point Ź button at Custom and the Custom
adjustment menu is displayed on the screen, you can use
the Point ŸźEXWWRQVWRFKRRVHWKHLWHP\RXZDQWWR
adjust.
Scale H/V .......... Adjust the Horizontal/Vertical screen
scale.
H&V................... When set to On, the aspect ratio is
fixed. The Scale V appears dimmed and
becomes unavailable. Adjust Scale H,
then the screen scale is automatically
modified based on the aspect ratio.
Position H/V ..... Adjust the Horizontal/Vertical screen
position.
Common........... Save the adjusted scale or position to all
the inputs. Press the SELECT button at
Common to display a confirmation box.
To save the scale or position, press the
SELECT button at Yes. When Custom
is selected, the saved scale or position is
used.
Reset................. Reset the all adjusted values. Press
the SELECT button at Reset to display
a confirmation box. To reset, press the
SELECT button at Yes.
Custom
3Note:
• When no signal is detected, Normal is set
automatically and the Aspect dialog box
disappears.
• The adjustable range for
Scale H/V and
Position H/V is limited depending on the
input signal.
• The concer pattern mode is disable when in
Custom mode.
Computer Input