User's Manual

35
Store
Tostoretheadjusteddata,selectStoreandthenpressthe
Point►ortheSELECTbutton.Movethehighlighttooneof
theModes1to5inwhichyouwanttostore,andthenpress
theSELECTbutton.
Mode free
Toclearthestoreddata,selectMode freeandthenpress
thePoint►ortheSELECTbutton.Movethehighlighttothe
modethatyouwanttoclearandthenpresstheSELECT
button.
Note:
•
Display area (H/V) cannotbeselectedwhen 480i, 575i,
480p, 575p, 720p, 1035ior1080iisselectedinthePC
SystemMenu(p.32).
•Wheninputcomputersignaltotheprojector,PC adjust
willbecomeavailable.
Reset
Toresettheadjusteddata,selectResetandpressthe
SELECTbutton.Aconfirmationboxappearsandthenselect
Yes.Alladjustmentswillreturntotheirpreviousfigures.
Computer Input
store?
Store
Vacant
Thismodehasstored
parameters.
ValuesofTotal dots,Horizontal,
Vertical,Display area Hand
Display area V.
PressSELECTbuttonto
storeadjusteddata.
PressMENUbutton
toclosethisdialog
box.
Mode free
Store