User Guide

48
Background
Select the background screen when no input signal is
detected. Press the Point
Ÿź buttons to switch between
each option.
Blue . . . Project a blue background
User . . . Project an image captured in the Logo setting.
Black . . Project a black background
This function decides whether to display On-Screen Displays.
On ........................... Show all the On-Screen displays.
Use this function when you want
to project images after the lamp
becomes bright enough. The factory
default setting is in this option.
Countdown Off....... Show the input image instead of
the countdown when turning on the
projector. Use this function when you
want to project the image as early as
possible even when the lamp is not
bright enough.
Off ........................... Hide the On-Screen Displays except;
z On-Screen Menu
z Power off? (p.20)
z No signal for Power management
(p.51)
z Please wait ...
z Arrows for the True function in the
Screen Menu (p.35)
z P-Timer
Setting
Display
Logo (Logo and Logo PIN code lock settings)
Logo select
This function allows you to customize the screen logo with
Logo select, Capture, Logo PIN code lock and Logo PIN
code change functions.
3 Note:
When On is selected in the Logo PIN code lock function,
Logo select and Capture functions cannot be selected.
Logo select
This function decides on the starting-up display from
among following options.
Off ........... Show the countdown display only.
Default .... Show the factory-set logo.
User ........ Show the image you captured.