User Guide
10
Part Names and Functions
Top Control
⑨ LAMP REPLACE indicator
Lights yellow when the projection lamp reaches its
end of life (pp.63, 70).
⑧ WARNING indicator
–Lights red when the projector detects an abnormal
condition.
–Blinks red when the internal temperature of the
projector exceeds the operating range (pp.60, 70).
④ ON/STAND–BY button
Turn the projector on or off (pp.18-20).
⑤ POWER indicator
–Lights red when the projector is in stand-by mode.
–Lights green during operations.
–Blinks green in the Power management mode
(p.51).
③ INPUT button
Select an input source (pp.27-28, 38-39).
⑥ MENU button
Open or close the On-Screen Menu (p.21).
② POINTŸźŻŹ (VOLUME
–
/+) buttons
–Select an item or adjust the value in the On-Screen
Menu (p.21).
–Pan the image in the Digital zoom +/- mode (p.36).
±$GMXVWWKHYROXPHOHYHO3RLQWŻŹEXWWRQVS
⑦ AUTO SETUP button
Execute the setting of Auto setup (includes Input
search, Auto PC adj. and Auto Keystone functions)
in the setting menu. (pp.23, 47).
① SELECT button
–Execute the selected item (p.21).
–Expand or compress the image in the Digital zoom
mode (p.36).
①
②
③
④
⑤
⑥
⑦
⑧
⑨