User's Manual Part 2

40
VIDEOInput
VIDEOSystemSelection
1
AVSystemMenu(VIDEOorS-VIDEO)
AVSystemMenu(COMPONENT)
2
If the projector cannot reproduce proper video
image, select a specific broadcast signal format
from among PAL, SECAM, NTSC, NTSC4.43,
PAL-M and PAL-N.
PAL/SECAM/NTSC/NTSC4.43/PAL-M/PAL-N
The projector automatically detects an incoming
video signal, and adjusts itself to optimize its
performance.
If the projector cannot reproduce proper video
image, select a specific component video signal
format from among 480i, 575i, 480p, 575p, 720p,
1035i and 1080i.
Auto
COMPONENTVIDEOSIGNALFORMAT
VIDEOorS-VIDEO
COMPONENT
The projector automatically detects an incoming
video system, and adjusts itself to optimize its
performance. When VIDEO System is PAL-M or
PAL-N, select the system manually.
Auto
Note:
The AV System Menu cannot be selected when
selecting SCART or HDMI.
Press the MENU button to display the
On-Screen Menu. Use the Point ▲▼ buttons
to select Input and then press the Point ►
button or the OK button.
Use the Point ▲▼ buttons to select VIDEO,
S-VIDEO or COMPUTER1(COMPONENT)
and then press the OK button.
3
Use the Point ▲▼ buttons to select System
and then press the Point ► button or the OK
button. Use the Point ▲▼ buttons to select
the desired system and then press the OK
button.