User's Manual Part 2

VIDEOInput
45
VIDEOInput
Keystone
This function is used to adjust keystone
distortion of the projected image. Use the Point
▲▼ buttons to choose the item you want to
adjust.
Keystone
To correct keystone distortion, press the OK
button.
Keystone appears on the screen. Use the
Point ▲▼ buttons to correct keystone
distortion (p. 25).
Store
To store or reset the keystone correction,
press the Point ► button.
Store .......... Keep the keystone correction
even when the AC power cord is
unplugged.
Reset .......... Release the keystone correction
when the AC power cord is
unplugged.
Keystone
Ceiling
Rear
When this function is set to On, the picture
will be top/bottom and left/right reversed. This
function is used to project the image from a
ceiling-mounted projector.
Ceiling
When this function is set to On, the picture will
be left/right reversed. This function is used to
project the image from rear of the screen.
Rear
To reset the adjusted data, select Reset and
press the OK button. A confirmation box appears
and then select Yes. All adjustments will return
to their previous figures.
Reset
Screenaspect
This function is used to project the image to a
4:3 or 16:9 projection screen.
Default(16:10) .... 16:10 is the aspect of the
LCD panel. The original
Screen Menu is available.
16:9 ..... Set to a 16:9 projection
screen.
4:3 . ..... Set to a 4:3 projection screen.
Note:
When the 16:9 function is selected on Screen
aspect menu, 16:9 is not available in the PC and
AV screen (pp.36, 44).